Control Panel Accessories

Enclosure gland plate, suitable for screw mounting of KEL-U / KEL-FA / KEL-QUICK / KEL-DPR / KEL-JUMBO cable entry frames.

Enclosure gland plate with slide frames, suitable for KEL-U / KEL-QUICK / KEL-JUMBO cable entry frames.

Split enclosure gland plate suitable for mounting centrally split KEL /KEL-JUMBO cable entry frames.

Enclosure base plate for mounting of MP modular gland plates. Suitable for Rittal enclosures.

Modular gland plate system for mounting cable entry components in enclosure bases, roofs and divider panels. Suitable for enclosure base plate KDR-BMP.

Pressure compensation element with metric thread to avoid water condensation in highly sealed enclosures (IP68)

Blank plates to close and seal unused cut-outs in enclosure or machine walls.

Blank plates to close and seal unused cut-outs in enclosure or machine walls.

Blank plates to close and seal unused cut-outs in enclosure or machine walls.

Blank plates to close cut-outs of pre-assembled KEL-SNAP frames and KDR-ESR enclosure gland plates.

Custom made thread extension for cable glands and cable entry plates with metric threads M25 / M32 / M50 / M63.

KEA is a multifunctional adapter for various cable entry systems. The adapter allows cables to be routed at a 90° angle and sealed with up to IP66.

The cover panels have an outer diameter of 150 mm and a center hole of 32.5 mm, 50.5 mm or 63.5 mm to accommodate the thread extensions, cable entry plates & split cable glands.

Universal brush strip for cable pass-through on enclosures, cabinets, server racks, panels, machines. Available in your required length!

Hexagonal locknuts for cable glands, special locknuts with cut-outs for various connectors and split locknuts for corrugated conduits.

Split enclosure base gland plate with brush grommets for Rittal VX25 enclosures.

This brush strip from icotek is suitable for installation in 10" or 19" server racks from various manufacturers.

Split flange plates with brush strips for compact enclosures by Rittal.

Flange plates for mounting cable entry components on compact enclosures, junction boxes or bus enclosures by Rittal and Fibox.

Reusable hook-and-loop cable ties for bundling and fixing of cables or complete cable harnesses, conduits and hoses.

Holders for hook-and-loop cable ties and tapes. Various mounting types.

Ground straps manufactured with highly flexible E-Cu stranded wires. Available in a variety of lengths and cross-sections.

Mounting feet for 10 x 3 mm bus bars and TS35 rails.

By using a drainage device, it is possible to safely drain off the condensate without losing a maximum enclosure protection of IP66.

10 x 3 mm copper bus bars for grounding of cables.

Self-adhesive foamed PUR seal for individual applications.

icotek offers a one-sided self-adhesive sealing tape for enclosure base plates.