Order Free icotek Product Samples Now!

Convince Yourself of the High Quality of Our Products

 

Select the product group and the desired standard sample kit and order it free of charge:

icotek Starter Kit »
Split cable transit frames & adapter grommets »
Split cable glands »
Multi-membrane cable entry plates »
Brush plates & brush strips »
Strain relief & cable management »
EMC cable shield clamps »
EMC cable entry system »

 

icotek Starter Kit
 

Get to know our product range - with the icotek starter kit!

Content:
1 × round cable entry plate KEL-DP
1 × split cable gland QVT
1 × EMC cable shield clamp MSKL for screw type mounting
1 × EMC cable shield clamp MSKL for 35 mm DIN rail

 

Product Samples: Split Cable Transit Frames & Adapter Grommets
 

Using the patented grommet based icotek cable entry system, a large number of pre-terminated cables (up to 65 mm in diameter) and cables without connectors (up to 75 mm in diameter) can be quickly routed into enclosures, control panels or machines and be sealed with up to IP66 / UL type 4X rated ingress protection (certified according to EN 60529 / UL50-E). In addition, the cable entry frames serve as strain reliefs on the cable (acc. to EN 62444). The split cable entry system enables quick and easy assembly which is great for retrofits and maintenance. Find out more »

Order a free sample »


KEL-U 24

Protection: IP54 / UL Type 12
Mounting type: screw mounting
Cut-out size: 112 × 36 mm

Order a free sample »


KEL-ER-E3

Protection: IP66 / UL Type 4X
Mounting type: screw mounting
Cut-out size: 65 × 24 mm

Order a free sample »


KEL-QUICK 24

ProtectionIP54
Mounting type: snap-in / screw mounting
Cut-out size: 112 × 36 mm

Order a free sample »


KEL-ER-BL 24

Protection: IP65
Mounting type: screw mounting
Cut-out size: 112 × 36 mm

Order a free sample »


DB 3×2 - M50

ProtectionIP54
Mounting type: locknut
Cut-out size: M50

Order a free sample »


IMAS-CONNECT

Adapter grommet AT-M20 × 1.5 (IP65)
Adapter grommet AT-K-M12 × 1.5 (IP66) + Adapter M16 × 1.5

 

Product Samples: Split Cable Glands
 

By using split cable glands by icotek pre-terminated cables with diameters from 1 to 35 mm can be quickly routed into enclosures, control panels or machines and be sealed with up to IP66 / IP68 / UL type 4X rated ingress protection (certified according to EN 60529 / UL50-E). In addition, the cable glands serve as strain reliefs on the cable. The split cable glands enable quick and easy assembly which is great for retrofits and maintenance. Find out more »

Order a free sample »


KVT-ER 32

Protection: IP66 / IP68 / UL Type 4X
Mounting type:  locknut
Cut-out size: M32

Order a free sample »


KVT 32

Protection: IP54 / UL Type 12
Mounting type: locknut
Cut-out size: M32

Order a free sample »


QVT 20

Protection: IP54
Mounting type: locknut
Cut-out size: M20

Order a free sample »


DB 3×2 - M50

ProtectionIP54
Mounting type: locknut
Cut-out size: M50

Order a free sample »


TE-M32/60

Mounting type:  locknut
Cut-out size: M32

 

Product Samples: Multi-Membrane Cable Entry Plates 

 

With the membrane based cable entry plates cables, pneumatic and hydraulic hoses or optical fibers can be quickly and space-savingly routed into control cabinets, panels or machines and be sealed with certified protection class up to IP68 (acc. to EN 60529) and UL type 4X (acc. to UL50 E). icotek cable entry plates are cost, space and time saving alternatives to traditional cable glands. Find out more »

Order a free sample »


KEL-DPU 24

Protection: IP66 / IP68 / UL Type 4X
Mounting type: snap-in / screw mounting
Cut-out size: 112 × 36 mm

Order a free sample »


KEL-DPZ 32

Protection: IP66 / IP68 / UL Type 4X
Mounting type: locknut
Cut-out size: M32

Order a free sample »


KEL-DP 32

Protection: IP65 / UL Type 12
Mounting type: snap-in
Cut-out size: M32

Order a free sample »


KEL-SCDP 32

Protection: IP65
Mounting type: snap-in
Cut-out size: M32

Order a free sample »


KEL-DPZ-HD 32

FDA compliant
Protection: IP66 / IP68
Mounting type: locknut
Cut-out size: M32

Order a free sample »


TE-M32/60

Mounting type:  locknut
Cut-out size: M32

 

Product samples: Brush Plates & Brush Strips

 

icotek offers cable pass-through solutions with brush seal like brush plates and brush strips that are perfectly suitable for applications where no high sealing rate is required. The icotek brush seal solutions are meant for dust and dirt-proof cable pass-through of lines with or without preassembled connectors. Find out more »

Order a free sample »


KEL-BES-S 24

Mounting type: screw mounting / riveting
Cut-out size: 112 × 36 mm

Order a free sample »


KEL-BES-S 50

Mounting type: snap-in / locknut
Cut-out size: M50

 

Product Samples: Strain Relief & Cable Management

 

By using universal icotek strain relief plates with cord grip function the user can quickly assemble, organize and strain relieve cables according to EN 62444. Find out more »

Order a free sample »


KZL 80

Mounting type: snap-in
Mounting location: 35 mm DIN rail / 
30 mm C-rail

Order a free sample »


KBH-R item

Mounting type: snap-in
Mounting location: item strut profile (with 6 mm groove)

Order a free sample »


KBH-R MiniTec / item

Mounting type: snap-in
Mounting location: MiniTec / item strut profile (with 8 mm groove)

Order a free sample »


KBH-R MiniTec

Mounting type: snap-in
Mounting location: MiniTec strut profile (with 8 mm groove)

Order a free sample »


KBH-R Bosch Rexroth G8

Mounting type: snap-in
Mounting location: Bosch Rexroth strut profile (with 8 mm groove)

Order a free sample »


KBH-R Bosch Rexroth G10

Mounting type: snap-in
Mounting location: Bosch Rexroth strut profile (with 10 mm groove)

Order a free sample »


KBH-R MayTec

Mounting type: snap-in
Mounting location: MayTec strut profile (with 8 mm groove)

Order a free sample »


KBH-R Rittal

Mounting type: snap-in
Mounting location: Rittal punched sections / 23 x 23 mm mounting rail

 

Product Samples: EMC Cable Shield Clamps

 

For process measurement and control equipment an increasingly higher level of protection against failure is required. EMI shielding and grounding is very important. The area where the cable shield is connected to the enclosure ground is a critical point. It is very important that the connection has a low resistance. All icotek EMC cable clamps for shielding cable diameters from 1.5 to 75 mm have been tested utilising various frequency ranges and in all tests there was minimal leakage resistance. Find out more »

Order a free sample »


EMC Set

Mounting type: snap-in / screw mounting
Mounting location: 35 mm DIN rail /
10 × 3 mm bus bar / PE conductor / universal

Order a free sample »


RLFZ

Mounting type: screw mounting
Mounting location: universal

 

Product Samples: EMC Cable Entry System

 

In case of conducted as well as field bound EMI disturbances, our split cable entry system EMC-KEL-DS and our split cable gland EMC-KVT-DS offer an effective way to divert and block those disturbances and provides an alternative to conventional EMC cable glands — especially when routing cables with connectors. Find out more »

Order a free sample »


EMC-KVT-DS 32

Protection: IP55
Mounting type: locknut
Cut-out size: M32