KEL-U CR split cable entry frames
for the use in cleanrooms / IP54 / UL Type 12
Voor aanvragen uit België klik hier »
Split cable entry system for routing cables with connectors providing an IP54 / UL Type 12 rating. Routing, sealing and providing strain relief for cable diameters from 1 to 35 mm.
The cable entry system is easy to install. Cable grommets are placed into compartments and are securely fixed to the frame during assembly.
The KEL-U CR frames match exactly the cut-out dimensions for 10-, 16- and 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed. The KEL-U-B CR frame matches the cut-out dimensions of 46 × 46 mm measuring instruments.
The single-row versions KEL-E CR are particularly suited for flat connectors. The small frames are ideal for applications with limited space.
A flat rubber gasket is included in the shipment.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.
Art.nr.
54244.600
Specificaties
Materiaal
Polyamide
Vlam klasse
UL94-V0, zelfdovend
Temperatuur
-40 C° tot 140 C°
Montage type
Schroefbevestiging, Snap-in met KEL-SNAP
Eigenschappen
UV-bestendig, halogeenvrij, corrosiebestendig (RVS uitvoering), trillingsbestendig, zonder siliconen
IP-classificatie
IP54
UL Type (UL 50E)
UL Type 12
Voordelen
Snelle en eenvoudige assemblage
Garantie op voorgeconfectioneerde kabels blijft behouden
Ombouw, reparaties en onderhoud kan snel en eenvoudig
Hoge kabeldichtheid, veel verschillende doorvoertules
Trekontlasting conform EN 62444
Hoge stabiliteit, schokbestendig
Ruimte besparende vorm
Sterk verhoogde kabeldichtheid bij gebruik van dubbele of viervoudige doorvoertules
Voor aanvragen uit België klik hier »
Split cable entry system for routing cables with connectors providing an IP54 / UL Type 12 rating. Routing, sealing and providing strain relief for cable diameters from 1 to 35 mm.
The cable entry system is easy to install. Cable grommets are placed into compartments and are securely fixed to the frame during assembly.
The KEL-U CR frames match exactly the cut-out dimensions for 10-, 16- and 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed. The KEL-U-B CR frame matches the cut-out dimensions of 46 × 46 mm measuring instruments.
The single-row versions KEL-E CR are particularly suited for flat connectors. The small frames are ideal for applications with limited space.
A flat rubber gasket is included in the shipment.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.
