KT CR multi | KT CR special | Speciale doorvoertulen
voor cleanrooms, IP54 / UL Type 12
Voor aanvragen uit België klik hier »
Cable grommets KT CR multi are used with the following cleanroom cable entry components:
- KEL-U CR cable entry frames
KT CR multi-hole and special grommets enable a sealing of the cables with IP54 and UL Type 12.
When using double or quadruple grommets the cable density of cleanroom cable entry frames can be greatly increased. The multi-hole model range KT CR small is designed for cable diameters from 1 to 8 mm. ATG CR adapter grommets provide the possibility to hold a small KT CR grommet to reduce the clamping range down to 1 mm.
When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.
Art.nr.
39939.601
Specificaties
Vlam klasse
UL94-V0, zelfdovend
Materiaal
Elastomeer
Eigenschappen
halogeenvrij, zonder siliconen
IP-classificatie
IP54
Temperatuur
-40 C° tot 100 C°
UL Type (UL 50E)
UL Type 12
Voordelen
Het doorvoeren van voorgeconfectioneerde kabels door kabel doorvoer frames en deelbare wartels
Beschikbaar voor een groot aantal kabeldiameters
Sterk verhoogde kabeldichtheid bij gebruik van dubbele of viervoudige doorvoertules
Voor aanvragen uit België klik hier »
Cable grommets KT CR multi are used with the following cleanroom cable entry components:
- KEL-U CR cable entry frames
KT CR multi-hole and special grommets enable a sealing of the cables with IP54 and UL Type 12.
When using double or quadruple grommets the cable density of cleanroom cable entry frames can be greatly increased. The multi-hole model range KT CR small is designed for cable diameters from 1 to 8 mm. ATG CR adapter grommets provide the possibility to hold a small KT CR grommet to reduce the clamping range down to 1 mm.
When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.
