KEL-DPR | Membraan kabelinvoerplaten met meerdere bereiken
met hoge kabeldichtheid / tot IP65 / UL Type 12
Voor aanvragen uit België klik hier »
The KEL-DPR 24 cable entry plate is based on the proven KEL-DP 24, but has an integrated polypropylene reinforcement frame. With the KEL-DPR 24, up to 48 cables from 1 to 16.1 mm can be inserted in the smallest of spaces and sealed in accordance with IP65 / UL Type 12.
The KEL-DPR 24 cable entry fits standard cut-outs for 24-pin heavy-duty connectors.
Electrical and pneumatic lines can be assembled in a matter of seconds. The corresponding membrane is perforated and the cables are simply pushed through. The KEL-DPR also allows the cables to be routed through the backside of the plate. Perforated membranes can be sealed with ST-B Plugs.
A version with M4 threaded bushings is optionally available for screw assembly from the enclosure interior. Please ask us about your desired variant.
Art.nr.
46503
Specificaties
IP-classificatie
IP64, IP55, IP54, IP65
Temperatuur
-40 C° tot 90 C°
Vlam klasse
UL94-V0, zelfdovend
Materiaal
Elastomeer, Basisframe: Polypropyleen
Montage type
Schroefbevestiging
Eigenschappen
halogeenvrij, zonder siliconen
UL Type (UL 50E)
UL Type 12
Voordelen
Strain relief due to reinforced membrane
Sealing in accordance with IP65 / UL Type 12
Very quick installation
Very high cable density
Cables can be fed through from both sides
Suitable for standardised cut-outs
Optionally available with M4 threaded bushings
Visually attractive design
Voor aanvragen uit België klik hier »
The KEL-DPR 24 cable entry plate is based on the proven KEL-DP 24, but has an integrated polypropylene reinforcement frame. With the KEL-DPR 24, up to 48 cables from 1 to 16.1 mm can be inserted in the smallest of spaces and sealed in accordance with IP65 / UL Type 12.
The KEL-DPR 24 cable entry fits standard cut-outs for 24-pin heavy-duty connectors.
Electrical and pneumatic lines can be assembled in a matter of seconds. The corresponding membrane is perforated and the cables are simply pushed through. The KEL-DPR also allows the cables to be routed through the backside of the plate. Perforated membranes can be sealed with ST-B Plugs.
A version with M4 threaded bushings is optionally available for screw assembly from the enclosure interior. Please ask us about your desired variant.
Montagevideo
Montagevideo
Overtuig uzelf van de eenvoudige en tijdbesparende
montage van onze producten.
Bekijk de montagevideo!
