KEL-DPZ-CLICK | Inklikbare membraan kabelinvoerplaten
met metrische schroefdraad M25 - M63 / IP65 / IP66 / IP68
Voor aanvragen uit België klik hier »
KEL-DPZ-CLICK cable entry plates are designed to route and seal cables without connectors or fibre optics (from 1.5 mm to 22 mm in diameter) in limited space.
The new variant of the proven cable entry plate KEL-DPZ is snapped into the cut-out directly from the front. This significantly reduces the assembly time. Alternatively, the new variant can be fastened with a locknut. The KEL-DPZ-CLICK series have a thread to fit in metric cut-outs from M25 to M63. Thus cut-outs for metric cable glands can be used.
Snapped into the cut-out:
For wall thickness 1 – 2.5 mm
Protection IP65
Fixed with a locknut:
For max. wall thickness 11 mm
Protection IP66 / IP68
The assembly of the KEL-DPZ-CLICK with cables or pneumatic hoses can be done quick and easy. Simply make a small hole in the thin membrane, push the cables through. The KEL-DPZ-CLICK provides strain relief and protection IP65 / IP66 / IP68.
ST-B Plugs can be used for sealing pierced membranes if cables have been removed.
Art.nr.
44056
Specificaties
IP-classificatie
IP64, IP66, IP68, IP67, IP55, IP54, IP65
Montage type
Bevestiging met borgmoer, Snap-in
Vlam klasse
UL94-V0, zelfdovend
Materiaal
Elastomeer, Basisframe: Polyamide
Eigenschappen
halogeenvrij, zonder siliconen
Temperatuur
-40 C° tot 100 C°
Voordelen
Snelle montage
Twee montagetypes: vastklikken en vastschroeven
Hoge kabeldichtheid
Gecertificeerde beschermingsklassen IP65/IP66/IP68 (volgens EN 60529)
Automatische afdichting en trekontlasting voor de kabel
Geschikt voor metrische uitsparingen
Hygiënisch design - vrij van vuilophopende uitsparingen
Voor aanvragen uit België klik hier »
KEL-DPZ-CLICK cable entry plates are designed to route and seal cables without connectors or fibre optics (from 1.5 mm to 22 mm in diameter) in limited space.
The new variant of the proven cable entry plate KEL-DPZ is snapped into the cut-out directly from the front. This significantly reduces the assembly time. Alternatively, the new variant can be fastened with a locknut. The KEL-DPZ-CLICK series have a thread to fit in metric cut-outs from M25 to M63. Thus cut-outs for metric cable glands can be used.
Snapped into the cut-out:
For wall thickness 1 – 2.5 mm
Protection IP65
Fixed with a locknut:
For max. wall thickness 11 mm
Protection IP66 / IP68
The assembly of the KEL-DPZ-CLICK with cables or pneumatic hoses can be done quick and easy. Simply make a small hole in the thin membrane, push the cables through. The KEL-DPZ-CLICK provides strain relief and protection IP65 / IP66 / IP68.
ST-B Plugs can be used for sealing pierced membranes if cables have been removed.
Montagevideo
Montagevideo
Overtuig uzelf van de eenvoudige en tijdbesparende
montage van onze producten.
Bekijk de montagevideo!
