KEL 183 | Gedeelde kabelinvoerframes
voor kabels met diameters tot 75 mm / IP54 / UL Type 12
Voor aanvragen uit België klik hier »
The split cable entry frame KEL 183 enables the user to route cables and tubes with a diameter of up to 75 mm (depending on the frame type) and to seal them in accordance with IP54 / up to UL Type 12.
For cables up to 35 mm the cable grommets KT can be used. With these split cable grommets, pre-terminated cables can be routed. For cables up to 75 mm we have created the grommets KTMB for KEL 183. Those are not split and have a defined area for pushing the cable through.
The KEL 183-E is the compact version of the cable entry frame KEL 183. It is available in 2 versions.
The KEL 183-E4 with its 4 large KT grommets is particularly suitable for routeing supply lines and hoses with diameters up to 35 mm. Using KT-DPF grommets enables flexible routeing of rigid cables.
The KEL 183-E16 with its 16 small KT grommets offers a large packing density for cables up to 17 mm in diameter, with or without preassembled connectors. Especially suitable for large sized connectors.
The grommets are securely fixed inside the frame and can’t fall out. Once the lid is affixed to the base frame, it is compressed and tightly sealed.
A flat rubber gasket is included in the shipment.
This product is available in different versions: With steel screws or stainless steel screws.
Art.nr.
47255
Specificaties
Materiaal
Polyamide
Vlam klasse
UL94-V0, zelfdovend
Temperatuur
-40 C° tot 140 C°
Montage type
Schroefbevestiging
Eigenschappen
UV-bestendig, halogeenvrij, corrosiebestendig (RVS uitvoering), trillingsbestendig, zonder siliconen
IP-classificatie
IP54
UL Type (UL 50E)
UL Type 12
Voordelen
Installatie voor kabels tot een diameter van 75mm
Het is mogelijk om stugge kabels te monteren onder een hoek
Ombouw, reparaties en onderhoud kan snel en eenvoudig
Sterk verhoogde kabeldichtheid bij gebruik van dubbele of viervoudige doorvoertules
Voor aanvragen uit België klik hier »
The split cable entry frame KEL 183 enables the user to route cables and tubes with a diameter of up to 75 mm (depending on the frame type) and to seal them in accordance with IP54 / up to UL Type 12.
For cables up to 35 mm the cable grommets KT can be used. With these split cable grommets, pre-terminated cables can be routed. For cables up to 75 mm we have created the grommets KTMB for KEL 183. Those are not split and have a defined area for pushing the cable through.
The KEL 183-E is the compact version of the cable entry frame KEL 183. It is available in 2 versions.
The KEL 183-E4 with its 4 large KT grommets is particularly suitable for routeing supply lines and hoses with diameters up to 35 mm. Using KT-DPF grommets enables flexible routeing of rigid cables.
The KEL 183-E16 with its 16 small KT grommets offers a large packing density for cables up to 17 mm in diameter, with or without preassembled connectors. Especially suitable for large sized connectors.
The grommets are securely fixed inside the frame and can’t fall out. Once the lid is affixed to the base frame, it is compressed and tightly sealed.
A flat rubber gasket is included in the shipment.
This product is available in different versions: With steel screws or stainless steel screws.
Montagevideo
Montagevideo
Overtuig uzelf van de eenvoudige en tijdbesparende
montage van onze producten.
Bekijk de montagevideo!
