KEL-ER | Gedeelde kabelinvoerframes
voor kabels met connectoren / IP66 / UL Type 12 / 4X*
Voor aanvragen uit België klik hier »
Split cable entry system for routing and sealing cables with connectors, providing an IP66 / UL Type 12/4X* rating and strain relief for cable diameters from 1 to 16 mm (single-hole grommets KT 1 - 15) and 13 to 35 mm (single-hole grommets KTG 13 - KT 34).
The cable entry system is easy to install. Cable grommets are placed into compartments and are securely fixed to the frame during assembly.
The KEL-ER frames match exactly the cut-out dimensions for 10-, 16- and 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed. The KEL-ER-B frame matches the cut-out dimensions of 46 × 46 mm measuring instruments.
The single-row versions KEL-ER-E are particularly suited for flat connectors. The small frames are ideal for applications with limited space.
A flat rubber gasket is included in the shipment.
This product is available in different versions: With steel screws or stainless steel screws. It is also possible to integrate threaded bushings. Please ask us about your desired variant.
The version with threaded bushings enables the cable entry frame to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.
*4X for indoor use only
Specificaties
IP-classificatie
IP64, IP66, IP55, IP54, IP65
Materiaal
Polyamide
UL Type (UL 50E)
UL Type 4X, UL Type 12
Vlam klasse
UL94-V0, zelfdovend
Temperatuur
-40 C° tot 140 C°
Montage type
Schroefbevestiging
Eigenschappen
UV-bestendig, halogeenvrij, corrosiebestendig (RVS uitvoering), trillingsbestendig, zonder siliconen
Voordelen
Garantie op voorgeconfectioneerde kabels blijft behouden
Ombouw, reparaties en onderhoud kan snel en eenvoudig
Hoge kabeldichtheid, veel verschillende doorvoertules
Trekontlasting conform EN 62444
Hoge stabiliteit, schokbestendig
Ruimte besparende vorm
Voor aanvragen uit België klik hier »
Split cable entry system for routing and sealing cables with connectors, providing an IP66 / UL Type 12/4X* rating and strain relief for cable diameters from 1 to 16 mm (single-hole grommets KT 1 - 15) and 13 to 35 mm (single-hole grommets KTG 13 - KT 34).
The cable entry system is easy to install. Cable grommets are placed into compartments and are securely fixed to the frame during assembly.
The KEL-ER frames match exactly the cut-out dimensions for 10-, 16- and 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed. The KEL-ER-B frame matches the cut-out dimensions of 46 × 46 mm measuring instruments.
The single-row versions KEL-ER-E are particularly suited for flat connectors. The small frames are ideal for applications with limited space.
A flat rubber gasket is included in the shipment.
This product is available in different versions: With steel screws or stainless steel screws. It is also possible to integrate threaded bushings. Please ask us about your desired variant.
The version with threaded bushings enables the cable entry frame to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.
*4X for indoor use only
Montagevideo
Montagevideo
Overtuig uzelf van de eenvoudige en tijdbesparende
montage van onze producten.
Bekijk de montagevideo!
