KEL-FG | Haakse deelbare kabelinvoer
voor 90° invoer van kabels met connectoren / IP54
Voor aanvragen uit België klik hier »
The cable entry frames KEL-FG are suited for installation, sealing and strain relief of cables with connectors and conduits at an angle of 90° to the cabinet, enclosure or machine wall.
The KEL-FG-A frame matches exactly the cut-out dimensions for 24-pin standard industrial connectors. For tool-free assembly / disassembly of the KEL-FG-A the snap mounting frame KEL-SNAP 24 can be used. The KEL-FG-B is suited for cut-outs 36 × 46 mm.
The single-row versions KEL-FG-E are particularly suited for flat connectors. The small frames are ideal for applications with limited space.
A flat rubber gasket is included in the shipment.
This product is available in different versions: With steel screws or stainless steel screws. It is also possible to integrate threaded bushings. Please ask us about your desired variant.
The version with threaded bushings enables the cable entry frame to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.
Art.nr.
42322
Specificaties
Materiaal
Polyamide
Vlam klasse
UL94-V0, zelfdovend
Temperatuur
-40 C° tot 140 C°
Montage type
Schroefbevestiging, Snap-in met KEL-SNAP
Eigenschappen
halogeenvrij, corrosiebestendig (RVS uitvoering), trillingsbestendig, zonder siliconen
IP-classificatie
IP54
UL Type (UL 50E)
UL Type 12
Voordelen
Haakse installatie op een muur
Mechanische bescherming direct bij de invoer van de kabel
Bescherming tegen waterstralen en druppels
Garantie op voorgeconfectioneerde kabels blijft behouden
Trekontlasting conform EN 62444
Hoge stabiliteit, schokbestendig
Ruimte besparende vorm
Sterk verhoogde kabeldichtheid bij gebruik van dubbele of viervoudige doorvoertules
Voor aanvragen uit België klik hier »
The cable entry frames KEL-FG are suited for installation, sealing and strain relief of cables with connectors and conduits at an angle of 90° to the cabinet, enclosure or machine wall.
The KEL-FG-A frame matches exactly the cut-out dimensions for 24-pin standard industrial connectors. For tool-free assembly / disassembly of the KEL-FG-A the snap mounting frame KEL-SNAP 24 can be used. The KEL-FG-B is suited for cut-outs 36 × 46 mm.
The single-row versions KEL-FG-E are particularly suited for flat connectors. The small frames are ideal for applications with limited space.
A flat rubber gasket is included in the shipment.
This product is available in different versions: With steel screws or stainless steel screws. It is also possible to integrate threaded bushings. Please ask us about your desired variant.
The version with threaded bushings enables the cable entry frame to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.
Montagevideo
Montagevideo
Overtuig uzelf van de eenvoudige en tijdbesparende
montage van onze producten.
Bekijk de montagevideo!
