KEL-QUICK | Gedeelde kabelinvoerframes
voor kabels met connectoren, montage zonder gereedschap / IP54 / UL Type 12
Voor aanvragen uit België klik hier »
The KEL-QUICK range is a compact system to route and seal pre-terminated cables as well as conduits or pneumatic hoses utilising split QT and QTMB grommets. After populating the entry frame with QT / QTMB grommets and cables, the cover lid is snapped onto the frame without using tools. Routing and sealing with IP54 for cable diameters from 1 to 29 mm.
The KEL-QUICK frames match exactly the cut-out dimensions for 10-, 16- and 24-pin standard industrial connectors. The KEL-QUICK-B frames match the cut-out dimensions 46 × 36 mm. These KEL-QUICK frames can either be screw mounted or simply snapped into the KEL-SNAP frame.
The single-row KEL-QUICK-E versions are particularly suited for flat connectors. The small frames are ideal for applications with limited space.
A flat rubber gasket is included in the shipment.
It is also possible to integrate threaded bushings. Please ask us about your desired variant. The version with threaded bushings enables the cable entry frame to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.
Art.nr.
42434
Specificaties
Materiaal
Polyamide
Eigenschappen
corrosiebestendig, UV-bestendig, halogeenvrij, zonder siliconen
Vlam klasse
UL94-V0, zelfdovend
Temperatuur
-40 C° tot 140 C°
Montage type
Schroefbevestiging, Snap-in met KEL-SNAP
IP-classificatie
IP54
UL Type (UL 50E)
UL Type 12
Voordelen
Snelle en eenvoudige snap-in assemblage van het frame
Garantie op voorgeconfectioneerde kabels blijft behouden
Ombouw, reparaties en onderhoud kan snel en eenvoudig
Hoge kabeldichtheid, veel verschillende doorvoertules
Sterk verhoogde kabeldichtheid bij gebruik van dubbele of viervoudige doorvoertules
Voor aanvragen uit België klik hier »
The KEL-QUICK range is a compact system to route and seal pre-terminated cables as well as conduits or pneumatic hoses utilising split QT and QTMB grommets. After populating the entry frame with QT / QTMB grommets and cables, the cover lid is snapped onto the frame without using tools. Routing and sealing with IP54 for cable diameters from 1 to 29 mm.
The KEL-QUICK frames match exactly the cut-out dimensions for 10-, 16- and 24-pin standard industrial connectors. The KEL-QUICK-B frames match the cut-out dimensions 46 × 36 mm. These KEL-QUICK frames can either be screw mounted or simply snapped into the KEL-SNAP frame.
The single-row KEL-QUICK-E versions are particularly suited for flat connectors. The small frames are ideal for applications with limited space.
A flat rubber gasket is included in the shipment.
It is also possible to integrate threaded bushings. Please ask us about your desired variant. The version with threaded bushings enables the cable entry frame to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.
Montagevideo
Montagevideo
Overtuig uzelf van de eenvoudige en tijdbesparende
montage van onze producten.
Bekijk de montagevideo!
