KVT | Deelbare kabelwartel
voor kabels met connectoren, M20 - M63 / IP54 / UL Type 12
Voor aanvragen uit België klik hier »
KVT is a circular split frame for quick and easy installation and sealing of cables with connectors or complete cable harnesses. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed (e.g. into control panels, enclosures or machinery) and sealed with IP54 / UL Type 12.
The cable glands are easy to install. The prefabricated cable is placed into the slit grommet which is set into one of the gland halves. Depending on the size of the cable gland, one, two or four separate grommets can be installed. By using multi-hole grommets up to 16 lines can be routed with one cable gland.
Polyamide locknuts as well as a sealing ring are included in the shipment.
For routing D-Sub, DVI or PROFIBUS connectors in combination with the split cable glands KVT, special locknuts with cut-outs are required.
Art.nr.
45028
Specificaties
Montage type
Bevestiging met borgmoer
Vlam klasse
UL94-V0, zelfdovend
Eigenschappen
halogeenvrij, zonder siliconen
IP-classificatie
IP54
Materiaal
Polycarbonaat
Temperatuur
-30 C° tot 100 C°
UL Type (UL 50E)
UL Type 12
Voordelen
Doorvoeren van kabels met en zonder connectors
Garantie op voorgeconfectioneerde kabels blijft behouden
Ombouw, reparaties en onderhoud kan snel en eenvoudig
Hoge kabeldichtheid, veel verschillende doorvoertules
Geschikt voor metrische uitsparingen
Zeskantige moer bij levering inbegrepen
Sterk verhoogde kabeldichtheid bij gebruik van dubbele of viervoudige doorvoertules
Voor aanvragen uit België klik hier »
KVT is a circular split frame for quick and easy installation and sealing of cables with connectors or complete cable harnesses. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed (e.g. into control panels, enclosures or machinery) and sealed with IP54 / UL Type 12.
The cable glands are easy to install. The prefabricated cable is placed into the slit grommet which is set into one of the gland halves. Depending on the size of the cable gland, one, two or four separate grommets can be installed. By using multi-hole grommets up to 16 lines can be routed with one cable gland.
Polyamide locknuts as well as a sealing ring are included in the shipment.
For routing D-Sub, DVI or PROFIBUS connectors in combination with the split cable glands KVT, special locknuts with cut-outs are required.
Montagevideo
Montagevideo
Overtuig uzelf van de eenvoudige en tijdbesparende
montage van onze producten.
Bekijk de montagevideo!
