KVT 80 | Deelbare kabelwartel
voor kabels met connectoren, geschikt voor uitsparing M80 / IP54 / UL Type 12
Voor aanvragen uit België klik hier »
The KVT 80 split cable glands are designed for routing and sealing cables with connectors. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed (e.g. into control panels, enclosures or machinery) and sealed with IP54 / UL Type 12.
By assembling the two frame halves with the screws provided, the grommets provide sufficient pressure on the routed cables to obtain a high degree of strain relief. By using multi-hole grommets up to 24 lines can be routed with one cable gland. The KVT 80 can be fitted to a wall thickness from 1.5 mm to 10 mm. A flat rubber gasket is included in the shipment.
Note:
When mounting the KVT 80 on sheet metal, we recommend the following torque values:
1.5 mm sheet = 1 Nm | 2 - 10 mm sheet = 1.5 Nm
Art.nr.
45237
Specificaties
Vlam klasse
UL94-V0, zelfdovend
Montage type
Schroefbevestiging
Eigenschappen
halogeenvrij, zonder siliconen
IP-classificatie
IP54
Materiaal
Polycarbonaat
Temperatuur
-30 C° tot 100 C°
UL Type (UL 50E)
UL Type 12
Voordelen
Doorvoeren van kabels met en zonder connectors
Garantie op voorgeconfectioneerde kabels blijft behouden
Ombouw, reparaties en onderhoud kan snel en eenvoudig
Hoge kabeldichtheid, veel verschillende doorvoertules
Snelle en eenvoudige montage vanaf de voorzijde
Trekontlasting conform EN 62444
Voor aanvragen uit België klik hier »
The KVT 80 split cable glands are designed for routing and sealing cables with connectors. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed (e.g. into control panels, enclosures or machinery) and sealed with IP54 / UL Type 12.
By assembling the two frame halves with the screws provided, the grommets provide sufficient pressure on the routed cables to obtain a high degree of strain relief. By using multi-hole grommets up to 24 lines can be routed with one cable gland. The KVT 80 can be fitted to a wall thickness from 1.5 mm to 10 mm. A flat rubber gasket is included in the shipment.
Note:
When mounting the KVT 80 on sheet metal, we recommend the following torque values:
1.5 mm sheet = 1 Nm | 2 - 10 mm sheet = 1.5 Nm
