KVT-ER | Deelbare kabelwartel
voor kabels met connectoren, M25 - M63 / IP66 / IP68 / UL Type 12 / 4X*
Voor aanvragen uit België klik hier »
KVT-ER are split cable glands for routing and sealing cables with connectors, with diameters from 1 to 16 mm (KT 1 - 15) and 13 to 35 mm (KTG 13 - KT 34). But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed (e.g. into control panels, enclosures or machinery), sealed and strain relieved acc. to EN 62444.
The KVT-ER sizes are based on metric standard cut-outs M25, M32, M50 and M63. Hexagonal locknuts are included in the shipment. For assembly, we recommend to tighten the cover lid screws with max. 2 Nm.
Due to the injected gasket and if single-hole grommets are used, the KVT-ER provides certified protection ratings IP66/IP68 and UL type 12 & 4X*.
*4X for indoor use only
Art.nr.
45452
Specificaties
IP-classificatie
IP64, IP66, IP68, IP67, IP55, IP54, IP65
Montage type
Bevestiging met borgmoer
Materiaal
Afdichtingslip: Elastomeer, Basisframe: Polypropyleen
UL Type (UL 50E)
UL Type 4X, UL Type 12
Vlam klasse
UL94-V0, zelfdovend
Eigenschappen
halogeenvrij, zonder siliconen
Temperatuur
-40 C° tot 110 C°
Voordelen
Beschermingsgraad IP66/IP68 (conform EN 60529)
Trekontlasting conform EN 62444
Garantie op voorgeconfectioneerde kabels blijft behouden
Ombouw, reparaties en onderhoud kan snel en eenvoudig
Hoge kabeldichtheid
Geschikt voor metrische uitsparingen
Zeskantige moer bij levering inbegrepen
Hoge stabiliteit, schokbestendig
Voor aanvragen uit België klik hier »
KVT-ER are split cable glands for routing and sealing cables with connectors, with diameters from 1 to 16 mm (KT 1 - 15) and 13 to 35 mm (KTG 13 - KT 34). But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed (e.g. into control panels, enclosures or machinery), sealed and strain relieved acc. to EN 62444.
The KVT-ER sizes are based on metric standard cut-outs M25, M32, M50 and M63. Hexagonal locknuts are included in the shipment. For assembly, we recommend to tighten the cover lid screws with max. 2 Nm.
Due to the injected gasket and if single-hole grommets are used, the KVT-ER provides certified protection ratings IP66/IP68 and UL type 12 & 4X*.
*4X for indoor use only
Montagevideo
Montagevideo
Overtuig uzelf van de eenvoudige en tijdbesparende
montage van onze producten.
Bekijk de montagevideo!
