KVT-SNAP | Deelbare kabelwartel voor klikmontage
voor kabels met connectoren, voor uitsparingen M32 - M63 / IP54
Voor aanvragen uit België klik hier »
KVT-SNAP is a circular split frame for quick and easy installation of cables with connectors or complete cable harnesses. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed (e.g. into control panels, enclosures or machinery) and sealed with IP54.
Depending on the size of the cable gland, one or four separate grommets can be installed. By using multi-hole grommets up to 16 lines can be routed with one cable gland.
The snap ring is screwed into metric thread or tapped into the cut-out (it can also be fastened with a locknut). Once the snap ring is affixed to the housing the equipped KVT is simply pushed into it. Fast and easy installation!
By using the model KVT-SNAP, cables can be routed through thick walls (> 5 mm) e.g. into cast terminal boxes without the use of tools.
A sealing ring is included in the shipment.
Art.nr.
45130
Specificaties
Montage type
Bevestiging met borgmoer, Snap-in
Vlam klasse
UL94-V0, zelfdovend
Eigenschappen
halogeenvrij, zonder siliconen
IP-classificatie
IP54
Materiaal
Polycarbonaat
Temperatuur
-30 C° tot 100 C°
Voordelen
Doorvoeren van kabels met en zonder connectors
Garantie op voorgeconfectioneerde kabels blijft behouden
Ombouw, reparaties en onderhoud kan snel en eenvoudig
Hoge kabeldichtheid, veel verschillende doorvoertules
Geschikt voor metrische uitsparingen
Sterk verhoogde kabeldichtheid bij gebruik van dubbele of viervoudige doorvoertules
Snelle en eenvoudige montage vanaf de voorzijde
Voor aanvragen uit België klik hier »
KVT-SNAP is a circular split frame for quick and easy installation of cables with connectors or complete cable harnesses. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed (e.g. into control panels, enclosures or machinery) and sealed with IP54.
Depending on the size of the cable gland, one or four separate grommets can be installed. By using multi-hole grommets up to 16 lines can be routed with one cable gland.
The snap ring is screwed into metric thread or tapped into the cut-out (it can also be fastened with a locknut). Once the snap ring is affixed to the housing the equipped KVT is simply pushed into it. Fast and easy installation!
By using the model KVT-SNAP, cables can be routed through thick walls (> 5 mm) e.g. into cast terminal boxes without the use of tools.
A sealing ring is included in the shipment.
