QVT-CLICK | Deelbare kabelwartel voor klikmontage
voor kabels met connectoren, voor uitsparingen M16 - M50 / IP54
Voor aanvragen uit België klik hier »
QVT-CLICK is a circular split frame for quick and easy installation of pre-terminated cables or complete cable harnesses. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed and sealed with IP54. Because of its extremely compact design, the QVT-CLICK range is especially suitable for small machines, devices and instruments.
The cable glands are easy to install. The prefabricated cable is placed into the slit grommet which is set into one of the gland halves. Depending on the size of the cable gland, one, two or four separate grommets can be installed. By using multi-hole grommets up to 16 lines can be routed with one cable gland.
The QVT-CLICK can be assembled without tools from the front side of the enclosure wall. Sizes QVT-CLICK 16, QVT-CLICK 20, QVT-CLICK 40|1 and QVT-CLICK 50 can be also screwed with a locknut.
A sealing ring is included in the shipment.
Note:
Snap-in assembly QVT-CLICK 16 + 20 (wall thickness 1.5 - 2.5 mm)
Snap-in assembly QVT-CLICK 25 + 32 + 40 + 50 (wall thickness 1 - 2.5 mm)
Art.nr.
45734
Specificaties
Vlam klasse
UL94-V0, zelfdovend
Montage type
Snap-in
IP-classificatie
IP54
Materiaal
Polycarbonaat
Temperatuur
-30 C° tot 100 C°
Voordelen
Snelle en eenvoudige montage vanaf de voorzijde
Ruimte besparende vorm
Doorvoeren van kabels met en zonder connectors
Garantie op voorgeconfectioneerde kabels blijft behouden
Ombouw, reparaties en onderhoud kan snel en eenvoudig
Snelle montage door in de uitsparing te klikken
Sterk verhoogde kabeldichtheid bij gebruik van dubbele of viervoudige doorvoertules
Voor aanvragen uit België klik hier »
QVT-CLICK is a circular split frame for quick and easy installation of pre-terminated cables or complete cable harnesses. But also electric, pneumatic or hydraulic lines without terminals or connectors as well as corrugated conduits can be easily routed and sealed with IP54. Because of its extremely compact design, the QVT-CLICK range is especially suitable for small machines, devices and instruments.
The cable glands are easy to install. The prefabricated cable is placed into the slit grommet which is set into one of the gland halves. Depending on the size of the cable gland, one, two or four separate grommets can be installed. By using multi-hole grommets up to 16 lines can be routed with one cable gland.
The QVT-CLICK can be assembled without tools from the front side of the enclosure wall. Sizes QVT-CLICK 16, QVT-CLICK 20, QVT-CLICK 40|1 and QVT-CLICK 50 can be also screwed with a locknut.
A sealing ring is included in the shipment.
Note:
Snap-in assembly QVT-CLICK 16 + 20 (wall thickness 1.5 - 2.5 mm)
Snap-in assembly QVT-CLICK 25 + 32 + 40 + 50 (wall thickness 1 - 2.5 mm)
Montagevideo
Montagevideo
Overtuig uzelf van de eenvoudige en tijdbesparende
montage van onze producten.
Bekijk de montagevideo!
