KEL-DPFR | Kabelgenomföringsplatta
med pyramidformade membran, för kablar upp till Ø 28 mm / upp till IP66 / UL Type 12/4X*
The KEL-DPFR cable entry plates make it possible to insert several cables with different diameters from 3 to 28 mm and seal them in accordance with up to IP66 / UL Type 12/4X*. A great benefit when the exact cable diameter is not known in advance.
Due to the flexibility and unique pyramid shape of the membranes, routing and flexible positioning of rigid cables is much easier compared to using conventional cable glands.
It is recommended that additional strain relief be provided for the cables using a cable tie.
Cutting of DPFR membranes: Cable diameter less 20%.
The KEL-DPFR fits the standard cut-outs for 16- and 24-pin heavy-duty connectors.
It is also possible to integrate threaded bushings. Please ask us about your desired variant.
The version with threaded bushings enables the cable entry plate to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.
*4X for indoor use only
ArtNr.
53922
Specifikationer
IP-Klass
IP64, IP66, IP55, IP54, IP65
UL Type (UL 50E)
UL Type 4X, UL Type 12
Brandklass
UL94-V0, självslocknande
Material
Elastomer, Basramen: Polyamid
Monteringstyp
Skruvmontering
Egenskaper
halogenfri, silikonfri
Temperatur
-40 C° till 100 C°
Edut ja hyödyt
Sealing according to IP66 (certified according to EN 60529)
Maximum flexibility
Very quick and easy installation
Space saving
Very large clamping range from 3 – 28 mm
Suitable for standard cut-outs
Rigid cables can be inserted at an angle without damaging the membrane
Lower storage costs
The KEL-DPFR cable entry plates make it possible to insert several cables with different diameters from 3 to 28 mm and seal them in accordance with up to IP66 / UL Type 12/4X*. A great benefit when the exact cable diameter is not known in advance.
Due to the flexibility and unique pyramid shape of the membranes, routing and flexible positioning of rigid cables is much easier compared to using conventional cable glands.
It is recommended that additional strain relief be provided for the cables using a cable tie.
Cutting of DPFR membranes: Cable diameter less 20%.
The KEL-DPFR fits the standard cut-outs for 16- and 24-pin heavy-duty connectors.
It is also possible to integrate threaded bushings. Please ask us about your desired variant.
The version with threaded bushings enables the cable entry plate to be screwed onto the housing from the inside out. This protects against vandalism and tampering with the housing from the outside.
*4X for indoor use only
Monteringsvideo
Monteringsvideo
Övertyga dig själv om den enkla och tidsbesparande
monteringen av våra produkter.
Kolla in monteringsvideon!
