KEL-DPR | Kabelgenomföringsplatta multi-membran
med hög kabeldensitet / upp till IP65 / UL Type 12
The KEL-DPR 24 cable entry plate is based on the proven KEL-DP 24, but has an integrated polypropylene reinforcement frame. With the KEL-DPR 24, up to 48 cables from 1 to 16.1 mm can be inserted in the smallest of spaces and sealed in accordance with IP65 / UL Type 12.
The KEL-DPR 24 cable entry fits standard cut-outs for 24-pin heavy-duty connectors.
Electrical and pneumatic lines can be assembled in a matter of seconds. The corresponding membrane is perforated and the cables are simply pushed through. The KEL-DPR also allows the cables to be routed through the backside of the plate. Perforated membranes can be sealed with ST-B Plugs.
A version with M4 threaded bushings is optionally available for screw assembly from the enclosure interior. Please ask us about your desired variant.
ArtNr.
46503
Specifikationer
IP-Klass
IP64, IP55, IP54, IP65
Temperatur
-40 C° till 90 C°
Brandklass
UL94-V0, självslocknande
Material
Elastomer, Basramen: Polypropylen
Monteringstyp
Skruvmontering
Egenskaper
halogenfri, silikonfri
UL Type (UL 50E)
UL Type 12
Edut ja hyödyt
Strain relief due to reinforced membrane
Sealing in accordance with IP65 / UL Type 12
Very quick installation
Very high cable density
Cables can be fed through from both sides
Suitable for standardised cut-outs
Optionally available with M4 threaded bushings
Visually attractive design
The KEL-DPR 24 cable entry plate is based on the proven KEL-DP 24, but has an integrated polypropylene reinforcement frame. With the KEL-DPR 24, up to 48 cables from 1 to 16.1 mm can be inserted in the smallest of spaces and sealed in accordance with IP65 / UL Type 12.
The KEL-DPR 24 cable entry fits standard cut-outs for 24-pin heavy-duty connectors.
Electrical and pneumatic lines can be assembled in a matter of seconds. The corresponding membrane is perforated and the cables are simply pushed through. The KEL-DPR also allows the cables to be routed through the backside of the plate. Perforated membranes can be sealed with ST-B Plugs.
A version with M4 threaded bushings is optionally available for screw assembly from the enclosure interior. Please ask us about your desired variant.
Monteringsvideo
Monteringsvideo
Övertyga dig själv om den enkla och tidsbesparande
monteringen av våra produkter.
Kolla in monteringsvideon!
