EMC-KEL-DS | Split EMC cable entry frames

for shielding cables with connectors / IP55

Order your free sample!

The EMC cable entry frame EMC-KEL-DS has been metallised (galvanise coated) to create a conductive surface.

The front cable grommet (KT) is used for strain relief and cable sealing on the cable jacket. The cable shield is contacted over 360° via the rear conductive grommet (EMC-KT).

The EMC-KEL-DS frames match exactly the cut-out dimensions for 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed.

The contact between the EMC-KEL-DS and the conductive housing wall is realised via the included conductive flat gasket.


IP rating (EN 60529) IP54, IP55
Material Polyamide, highly conductive coating
Flame class UL94-HB
Operating temperature -40 C° to 140 C°
Mounting options Screw type mounting

Advantages & benefits

  • Both conducted and field-bound disturbances can be reliably diverted
  • Strain relief and sealing are separated from the EMC contact
  • Scratch-resistant surface
  • Contacting the cable shield over 360°
  • EMC grommets made entirely from conductive elastomer
  • Very good dissipation values
  • Very good shielding effect with regard to EMC tightness

Product types & sizes

You haven't found anything suitable yet?

Try the ProductFinder

Assembly video

Convince yourself of the simple and
time-saving assembly of our products.

Watch the assembly video!

Simply assemble the cable entry component with grommets

Always find the right size and the right cable grommets for your cable entry!

Suitable accessories

You might also be interested in the following products