Sealing tape 10×3×1000
| Part No. | 42999 |
| EAN | 4251269335938 |
| Package quantity | 1 |
| Length | 1,000 mm |
| Width | 10 mm |
| Height | 3 mm |
available
-
Products
»
Enclosure and control panel accessories
»
Sealing tape
Sealing tape
for enclosure base plates, self-adhesive
icotek offers a one-sided self-adhesive sealing tape for the enclosure base plates. It is available in two lengths, 1 metre and 10 metres long.
Specifications
| Operating temperature | -40 C° to 100 C° |
| Material | Cellular rubber (CR/NBR) |
Advantages & benefits
- Very simple and quick installation
- Very good recovery properties
Product types & sizes
Sealing tape 10×3×10000
| Part No. | 42999.10000 |
| EAN | 4251269328862 |
| Package quantity | 1 |
| Length | 10,000 mm |
| Width | 10 mm |
| Height | 3 mm |
available
You haven't found anything suitable yet?
Try the ProductFinderSuitable for:
KDR-VX25
Enclosure gland plate, IP54
Enclosure gland plate, suitable for screw mounting of KEL-U / KEL-FA / KEL-QUICK / KEL-DPR / KEL-JUMBO cable entry frames.
KDR-ESR
Enclosure gland plate with slide frames, IP54
Enclosure gland plate with slide frames, suitable for KEL-U / KEL-QUICK / KEL-JUMBO cable entry frames.
KDR 2
Split enclosure gland plate, IP54
Split enclosure gland plate suitable for mounting centrally split KEL /KEL-JUMBO cable entry frames.
You might also be interested in the following products
Sealing bead
Sealing bead made of PU foam, self-adhesive
Self-adhesive foamed PUR seal for individual applications.
Flat gaskets
Flat gaskets
A flat gasket is provided to ensure a clean seal between the cable entry frame and the enclosure / control panel wall.
IFPS
Fire penetration seals, single
Fire penetration seals for certified icotek BS cable entry components, approved for use in railway technology.
PCE
Pressure compensation element with metric thread, IP68
Pressure compensation element with metric thread to avoid water condensation in highly sealed enclosures (IP68)
Drainage device
Drainage device / IP66 / IP69K
By using a drainage device, it is possible to safely drain off the condensate without losing a maximum enclosure protection of IP66.
BPM
Blank plates, metal / stainless steel, IP66
Blank plates to close and seal unused cut-outs in enclosure or machine walls.
BPK
Blank plates, plastic, for screw assembly, IP66 / UL Type 12/4X*
Blank plates to close and seal unused cut-outs in enclosure or machine walls.
BPK-RF
Blank plates, plastic, pluggable, IP54 / UL Type 12
Blank plates to close and seal unused cut-outs in enclosure or machine walls.