The grommet AT-KS is constructed on the basis of a large KT cable grommet. The polyamide body is moulded with elastomer.
The cut-out enables a snap-in assembly of all couplers based on the Keystone system. If required the keystone couplers can be disassembled with a screwdriver.
The insertion of AT-KS into an icotek cable entry frame enables the routing of cables with and without connectors in combination with the creation of interfaces for Keystone couplers within one cable entry system. Separate cut-outs for connectors are no longer necessary.
AT-KS provides ingress protection of up to IP54 (depending on the Keystone coupler type and manufacturer).
|IP rating (EN 60529)
|-40 C° to 100 C°
|silicone free, halogen free
Convince yourself of the simple and time-saving assembly of our products.
Watch the assembly video!
Always find the right size and the right cable grommets for your cable entry!
KT grommet based cable entry frames for tool-free assembly. Suitable for standard cut-outs of heavy industrial connectors.
Classic KT grommet based cable entry frames for standard cut-outs of heavy industrial connectors. Also available as multi-row versions.
KT grommet based cable entry frames for supply cables with large diameters of up to 75 mm. Available as single or double row version.
KT grommet based flange enclosure for routing preassembled cables in a 90° angle to the enclosure wall. Available as single or double row version.
KT grommet based cable entry frames for standard cut-outs of heavy industrial connectors. Available as single or double row version.
KT grommet based split cable gland for preassembled cables with metric thread sizes M20 / M25 / M32 / M40 / M50 / M63.
KT grommet based split cable gland for routing pre-terminated cables at a 90° angle to the enclosure wall. Metric thread sizes M32 / M50.
KT grommet based split cable gland for tool-free snap-in mounting on metric cut-outs M32 / M40 / M63.
KT grommet based split cable gland for cables with large round connectors of up to 80 mm in diameter.
Adapter grommets with inner thread based on KT cable grommets.
Blank adapter grommet based on KT grommets for custom interface solutions (e.g. screw mounted hybrid connectors).
The bulkhead fittings & couplings for pneumatic hoses are also available individually for use with the adapter grommets.
Adapter grommet based on KT cable grommets for PushPull connection technology.
Adapter grommet based on KT cable grommets for square flanges with the dimensions 19.8 x 19.8 mm (M23).
Heavy duty cable entry plate with IFPS fire penetration seals acc. to EN 45545-3.
Fire penetration seals for certified icotek BS cable entry components, approved for use in railway technology.
Wrenches SW 85 and SW 100 for M75 and M85 hexagonal plastic locknuts. Mounting tool for KEL-DPF.
Blank plates to close and seal unused cut-outs in enclosure or machine walls.
Split enclosure base gland plate with brush grommets for Rittal TS8 enclosures.
Split conductive EMC cable gland with metric thread M32 / M63. Protection class IP55.