|For max. no. of cables
|No. of teeth
The strain relief plate SF|ZL is used for assembly on 35 mm top hat DIN rails. It can be used for strain relief of cables and conduits.
The SF|ZL range is based upon the strain relief plate ZL, which is mounted on snap-in mounting feet for 35 mm top hat rails.
|-40 C° to 140 C°
Snap foot: Spring steel
|silicone free, halogen free
Convince yourself of the simple and time-saving assembly of our products.
Watch the assembly video!
Always find the right size and the right cable grommets for your cable entry!
Strain relief and cable routing plates for snap-on assembly on 35 mm top hat DIN rails and C section rails C30.
Plates for secure strain relief and cable routing. Mounting via screws.
The cable clamps are characterised by a high clamping range and great flexibility. Ideally suited for strain relief on the C section rail C30.
Holders for hook-and-loop cable ties and tapes. Various mounting types.
KT grommet based cable entry frames for supply cables with large diameters of up to 75 mm. Available as single or double row version.
Mounting feet for 10 x 3 mm bus bars and 35 mm top hat DIN rails.
Set of round knockout punches for cut-outs M16 - M63. Suitable for cable glands and round cable entry plates.
Cable entry plates for standard cables with IFPS fire penetration seals acc. to EN 45545-3.
Round hygienic gland plate with certified sealing IP66/IP68. Metric threads M32-M63.
EMC cable clamps for direct mounting via screws, e.g. on metal sheets.