KEA 24 is a cable entry adapter for accommodating various icotek cable entry frames and plates of size 24. The adapter allows cables to be routed at a 90° angle. The installation direction can be horizontal or vertical. The cables are protected against mechanical tension in the entry and exit areas. Wall mounting is done either with screws and nuts or by using threaded bushings. A suitable wall seal is included in the scope of delivery. icotek also offers suitable punches for the cut-out.
The cable entry plates KEL-DP 24 Type B can be easily snapped onto the KEA 24 W90 R. The cable entry frames KEL 24, KEL-U 24, KEL-ER 24 and the cable entry plates KEL-DPZ 24 and KEL-DPU 24 can be screwed onto the KEA 24 W90 S. This enables the insertion of pre-assembled and non-assembled cables.
Deelbaar kabelinvoerframe, IP66 / UL Type 12 / 4X*
Kabeldoorvoer op basis van KT doorvoertulen voor standaarduitsparingen van zware industriële connectoren. Verkrijgbaar als enkele of dubbele rijversie.
Kabeldoorvoer op basis van KT doorvoertulen voor standaarduitsparingen van zware industriële connectoren. Verkrijgbaar als enkele of dubbele rijversie.
Centraal deelbaar kabelinvoerframe, IP54 / UL Type 12
Klassiek centraal deelbaar frame voor kabelinvoer op basis van KT doorvoertulen. Geschikt voor uitsparingen van zware meerpolige connectoren. Verkrijgbaar als enkele, dubbele of meerrijige versies.
Flensbehuizing op basis van KT doorvoertulen voor het geleiden van voorgemonteerde kabels in een hoek van 90° met de behuizingswand. Verkrijgbaar als enkele of dubbele rijversie.
Gedeelde 90° kabeldoorvoerbehuizing, IP54 / UL Type 12
Flensbehuizing op basis van KT doorvoertulen voor het geleiden van voorgemonteerde kabels in een hoek van 90° met de behuizingswand. Verkrijgbaar als enkele of dubbele rijversie.