EMC-KEL-U | Deelbare EMC-kabelinvoerframes
voor het afschermen van kabels met connectoren
Bestel direct online @ CC Nederland »
Voor aanvragen uit België klik hier »
The EMC cable entry frames EMC-KEL-U are based on the KEL-U and KEL-E. Due to a conductive surface, disturbances in the cable shields on the control cabinet can be easily dissipated. Field bound disturbances are derived by the metallisation.
The cable entry system is easy to install. Cable grommets are placed into compartments and are securely fixed to the frame during assembly.
The EMC-KEL-U frames match exactly the cut-out dimensions for 16- and 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed.
The single-row versions EMC-KEL-E are particularly suited for flat connectors. The small frames are ideal for applications with limited space.
Between the EMC-KEL-U and the metal wall a conductive flat gasket (included) is mounted. The flange surface on the metal wall must be free of paint!
Art.nr.
98047
Specificaties
Vlam klasse
UL94-HB
Materiaal
Polyamide, sterk geleidende coating
Temperatuur
-40 C° tot 140 C°
Montage type
Schroefbevestiging
Eigenschappen
trillingsbestendig
Voordelen
Zowel geleide als veldgebonden storingen kunnen betrouwbaar worden afgeleid
Krasbestendig oppervlak
Maakt over 360° contact met de kabelafscherming
EMC-doorvoertules volledig gemaakt van geleidend elastomeer
Hoge kabeldichtheid, veel verschillende doorvoertules
Zeer goede dissipatiewaarden
Zeer goede afscherming met betrekking tot EMC-dichtheid
Voor aanvragen uit België klik hier »
The EMC cable entry frames EMC-KEL-U are based on the KEL-U and KEL-E. Due to a conductive surface, disturbances in the cable shields on the control cabinet can be easily dissipated. Field bound disturbances are derived by the metallisation.
The cable entry system is easy to install. Cable grommets are placed into compartments and are securely fixed to the frame during assembly.
The EMC-KEL-U frames match exactly the cut-out dimensions for 16- and 24-pin standard industrial connectors. Either a cut-out of 36 mm or 46 mm in height can be chosen depending on the cables being routed.
The single-row versions EMC-KEL-E are particularly suited for flat connectors. The small frames are ideal for applications with limited space.
Between the EMC-KEL-U and the metal wall a conductive flat gasket (included) is mounted. The flange surface on the metal wall must be free of paint!
Montagevideo
Montagevideo
Overtuig uzelf van de eenvoudige en tijdbesparende
montage van onze producten.
Bekijk de montagevideo!
