KEL-ER-BS kabelinvoerframes met brandwerende afdichtingen (EN 45545-3)
voor kabels met connectoren / IP66 / UL Type 12 / 4X*
icotek cable entry frames with fire penetration seals, approved for use in railway technology (meeting the standards EN 45545-2, EN 45545-3 and EN 1363-1).
Split cable entry system for routing and sealing cables with connectors, providing an IP66 / UL type 12/4X* rating and strain relief for cable diameters from 1 to 16 mm (single-hole grommets KT 1 - 15) and 16 to 35 mm (single-hole grommets KT 16 - 34).
The cable entry system is easy to install. Cable grommets are placed into compartments and are securely fixed to the frame during assembly.
The KEL-ER-BS frame matches exactly the cut-out dimensions for 10-, 16- and 24-pin standard industrial connectors. The KEL-ER-B-BS frame matches exactly the cut-out dimensions of 46 × 46 mm measuring instruments. The single-row version KEL-ER-E-BS is particularly suited for flat connectors. The small frame is ideal for applications with limited space. A flat rubber gasket is included in the shipment.
The intumescent (foaming) IFPS fire penetration seals which are mounted at the backside of the cable entry components consist of expandable graphite and increase their volume by a multiple in case of a fire.
This creates a barrier which prevents a penetration of flames and high heat from one room into another for the longest possible period.
*4X for indoor use only
Specificaties
IP-classificatie
IP64, IP66, IP55, IP54, IP65
Materiaal
Polyamide
UL Type (UL 50E)
UL Type 4X, UL Type 12
Vlam klasse
UL94-V0, zelfdovend
Eigenschappen
opschuimend, halogeenvrij, corrosiebestendig (RVS uitvoering), zonder siliconen
Temperatuur
-40 C° tot 140 C°
Montage type
Schroefbevestiging
Voordelen
Goedgekeurd voor gebruik in spoorwegtechnologie (EN 45545-2, EN 45545-3, EN 1363-1 en EN 61373)
Slechts één brandwerende afdichting per kabelinvoercomponent vereist
Hoge classificaties E45 / EI30
Garantie op voorgeconfectioneerde kabels blijft behouden
Ombouw, reparaties en onderhoud kan snel en eenvoudig
Hoge kabeldichtheid, veel verschillende doorvoertules
Trekontlasting conform EN 62444
Hoge stabiliteit, schokbestendig
Ruimte besparende vorm
Ideaal voor doorvoeren van SUB-D connectoren
icotek cable entry frames with fire penetration seals, approved for use in railway technology (meeting the standards EN 45545-2, EN 45545-3 and EN 1363-1).
Split cable entry system for routing and sealing cables with connectors, providing an IP66 / UL type 12/4X* rating and strain relief for cable diameters from 1 to 16 mm (single-hole grommets KT 1 - 15) and 16 to 35 mm (single-hole grommets KT 16 - 34).
The cable entry system is easy to install. Cable grommets are placed into compartments and are securely fixed to the frame during assembly.
The KEL-ER-BS frame matches exactly the cut-out dimensions for 10-, 16- and 24-pin standard industrial connectors. The KEL-ER-B-BS frame matches exactly the cut-out dimensions of 46 × 46 mm measuring instruments. The single-row version KEL-ER-E-BS is particularly suited for flat connectors. The small frame is ideal for applications with limited space. A flat rubber gasket is included in the shipment.
The intumescent (foaming) IFPS fire penetration seals which are mounted at the backside of the cable entry components consist of expandable graphite and increase their volume by a multiple in case of a fire.
This creates a barrier which prevents a penetration of flames and high heat from one room into another for the longest possible period.
*4X for indoor use only
