Products»Cable glands for cables with connectors

Split cable glands for cables with connectors

waterproof with up to IP66 / IP68 seal

 
Split cable glands for cables with connectors - waterproof with up to IP66 / IP68 seal

By using split cable glands by icotek pre-terminated cables with diameters from 1 to 35 mm can be quickly routed into enclosures, control panels or machines and be sealed with up to IP66 / IP68 / UL Type 4X rated ingress protection (certified according to EN 60529 / UL50-E). In addition, the cable glands serve as strain reliefs on the cable. The split cable glands enable quick and easy assembly which is great for retrofits and maintenance. Find out more »

Request your free product sample

icotek cable glands at a glance

Filter products:

Thread extension for cable glands and cable entry plates, M32 / M50

Custom made thread extension for cable glands and cable entry plates with metric threads M32 / M50.

» TE Thread extension
Split cable gland for preassembled cables with metric thread sizes M25 - M63.

Split cable gland, M25-M63, IP66/IP68 / UL Type 12/4X*

KT grommet based split cable gland for preassembled cables with metric thread sizes M25 / M32 / M50 / M63.

» KVT-ER
Split cable gland for preassembled cables with metric thread sizes M20 to M63.

Split cable gland, M20-M63, IP54 / UL Type 12

KT grommet based split cable gland for preassembled cables with metric thread sizes M20 / M25 / M32 / M40 / M50 / M63.

» KVT

Split 90° cable gland, M32 / M50, IP54

KT grommet based split cable gland for routing pre-terminated cables at a 90° angle to the enclosure wall. Metric thread sizes M32 / M50.

» KVT-W90

Split snap-in cable gland, M32-M63, IP54

KT grommet based split cable gland for tool-free snap-in mounting on metric cut-outs M32 / M40 / M63.

» KVT-SNAP

Split cable gland, M80, IP54 / UL Type 12

KT grommet based split cable gland for cables with large round connectors of up to 80 mm in diameter.

» KVT 80

Split 360° cable entry system, M32-M75*, IP54

With the new distribution box, centrally routed cables (with and without connectors) can be distributed 360° in all desired directions.

» DB Distribution Box

Compact split cable gland, M16-M50, IP54

QT grommet based compact split cable glands with metric thread sizes M16 to M50.

» QVT

Compact split snap-in cable gland, M16-M50, IP54

QT grommet based compact split cable gland for tool-free snap-in mounting.

» QVT-CLICK
Grommet based cable entry for standard cut-outs of heavy industrial connectors. Available as single or double row version.

Split cable entry systems, IP54 - IP66

Split cable entry systems for preterminated cables (based on standard cut-outs of industrial multi-pin heavy duty connectors).

» Split cable entry systems

Split cable gland with brush seal

Split cable gland with brush seal, for metric cut-outs M32/M50. Mounting via locknut or snap-in.

» KEL-BES-S round

Locknuts, M16-M85

Hexagonal locknuts for cable glands, special locknuts with cut-outs for various connectors and split locknuts for corrugated conduits.

» KGM | GMT

Cable grommets

Split cable grommets for prefabricated cables, multi-range grommets, special grommets for e.g. telephone cables, flat wires or supply lines.

» Cable grommets

Membrane plugs for cable entry plates & cable grommets

Plugs for sealing already pierced membranes of cable entry plates as well as for numerous cable grommets.

» ST-B

IMAS-CONNECT™ Adapter grommets

Adapter grommets with inner threads and for mounting of Keystone and PushPull modules.

» IMAS-CONNECT™

The practical icotek product configurator

With the product configurator, you can now assemble your cable entry system with the required cable or adapter grommets.

Check it out!
 
 

Info guide – everything you need to know about split cable glands

The icotek split cable glands enable the transit of connectorised cables or complete cable harnesses. In contrast to conventional cable glands the connector doesn’t have to be cut off the cable in advance and be re-connected afterwards. Thus, the cable manufacturer's warranty remains and you save a lot of assembly time. 

But also electrical, pneumatic or hydraulic lines without connectors as well as corrugated conduits and hoses can be easily routed, sealed and strain relieved using split cable glands.

 

icotek cable glands - completely splittable and user-friendly

A quick and easy assembly is possible due to the completely split system. The prefabricated cable is placed into the split grommet which is set into one of the gland halves. Due to the fine gradation of the cable diameters, there is an excellent adaptation of the grommet to the inserted cable or hose. Depending on the size of the cable gland, one, two or four separate grommets can be installed. By using multi-hole grommets up to 16 lines can be routed with one cable gland.

Easy assembly of the cable glands

The two gland halves can be easily snapped together without the need of tools (screw assembly in case of the KVT-ER model). The assembled cables are securely sealed and held inside the cable gland grommets. To mount the cable glands either snap it into the wall or screw it with a hexagonal locknut. Convince yourself of the easy and quick installation of the split cable glands with our assembly video.

 

Large variety of cable glands

The different model ranges of the icotek split cable glands offer various application possibilities:

  • The » split cable gland KVT-ER provides high certified ingress protection ratings (IP65 / IP66 / IP67 / IP68 / UL type 12/4X*) due to an injected gasket and it provides strain relief acc. to EN 62444. The KVT-ER is available for metric cut-outs M25-M63.
  • The » split IP54 cable gland KVT is an icotek classic. It can be tool-free assembled with » KT grommets and be mounted on metric cut-outs M20-M63.
  • The » angled split IP54 cable gland KVT-W90 enables prefabricated and standard cable transit at a 90° angle to the enclosure or machine wall. It is as well particularly suitable for the introduction of corrugated conduits. Available for M32 and M50 cut-outs.
  • The very » compact split cable gland QVT (IP54) is tool-free assembled with » QT grommets and can be mounted on metric cut-outs M16-M50. The QVT series is characterised by its low mounting height and its extremely small structure.
  • The » split IP54 cable glands QVT-CLICK (M16 - M40) and » KVT-SNAP (M32, M40 and M63) are ideal for mounting without any tools by snapping them directly into the cut-out. Therefore, they are suited perfectly when maintenance and retrofitting. A fixation with a locknut is not necessary, but possible with the KVT-SNAP.
  • For applications with lower requirements on ingress protection icotek offers a » split cable gland with brush seal, specifically designed to feed cables easily into server racks, control panels and through raised floors and walls.
  • Optional accessories: For split cable glands icotek offers » split locknuts as well as special locknuts which are suitable for routing D-Sub, DVI, Patch, USB, VGA or PROFIBUS connectors.

Depending on the model series, the split cable glands KVT and QVT are available in metric sizes from M16 to M63, thus matching metric standard cut-outs.

*4X for indoor use only

Well tested & certified

The split icotek cable glands comply with important standards like flame class UL94-V0, IP / UL rated ingress protection, UL recognized, DNV, RINA, ECOLAB detergent resistance, UV resistance and the European railway standard EN 45545-2 for fire safety and are therefore suitable for many applications and industries. Certificates or declarations of conformity can be requested directly from us.