|Fasten with locknut
|Max. cable diameter
|Cut-out size, round
|M32 × 1,5
The icotek cable glands and cable entry plates with metric thread are screwed with a locknut during assembly. If the thread lengths are not sufficient, for example when
mounting on sandwich panels or thick concrete walls, icotek offers a practical solution: the icotek thread extension!
The icotek thread extension is available in two sizes (M32, M50, M63) and in three lengths (35 mm, 60 mm, 120 mm) and represents a real innovation in the field of cable management. The different lengths can be flexibly combined or shortened at the designated points. This means that not only very large, but also dimensionally accurate distances can be overcome when routing the cable. Due to their stable construction, almost any number of thread extensions can be screwed together.
Cut-out size: 37 / 55 / 68 mm (standard sizes for hole saws)
|-40 C° to 140 C°
|Fasten with locknut
|silicone free, halogen free
Convince yourself of the simple and time-saving assembly of our products.
Watch the assembly video!
Always find the right size and the right cable grommets for your cable entry!
KT grommet based split cable gland for preassembled cables with metric thread sizes M25 / M32 / M50 / M63.
KT grommet based split cable gland for preassembled cables with metric thread sizes M20 / M25 / M32 / M40 / M50 / M63.
KT grommet based split cable gland for routing pre-terminated cables at a 90° angle to the enclosure wall. Metric thread sizes M32 / M50.
With the distribution box, centrally routed cables (with and without connectors) can be distributed 360° in all desired directions.
QT grommet based compact split cable glands with metric thread sizes M16 to M50.
QT grommet based compact split cable gland for tool-free snap-in mounting.
Round cable entry plate with certified sealing IP66/IP68 / UL Type 12/4X*. Metric threads M25-M63.
Flexible cable entry grommet for single cables. Metric threads M25-M63.
Flexible pyramid shaped cable entry grommet for cable diameters 3-70 mm. Metric threads M25-M85.
Split cable gland with brush seal, for metric cut-outs M32/M50. Mounting via locknut or snap-in.