|Mounting height||2 mm|
The grommet AT-PP is constructed on the basis of a large KT cable grommet. The polyamide body is molded with elastomer.
The cut-out enables a screw assembly of all compact connector housings based on the PushPull device connection technology.
The insertion of AT-PP into an icotek cable entry frame enables the routing of cables with and without connectors in combination with the creation of interfaces for PushPull connectors within one cable entry system. Separate cut-outs for connectors are no longer necessary.
AT-PP provides ingress protection of up to IP65.
|IP rating (EN 60529)||IP54, IP55, IP64, IP65|
|Flame class||UL94-V0, self-extinguishing|
|Operating temperature||-40 C° to 90 C°|
|Properties||silicone free, halogen free|
KT grommet based cable entry frames for standard cut-outs of heavy industrial connectors. Available as single or double row version.
Classic KT grommet based cable entry frames for standard cut-outs of heavy industrial connectors. Also available as multi-row versions.
KT grommet based flange enclosure for routing preassembled cables in a 90° angle to the enclosure wall. Available as single or double row version.
KT grommet based cable entry frames for supply cables with large diameters of up to 75 mm. Available as single or double row version.
KT grommet based split cable gland for preassembled cables with metric thread sizes M20 / M25 / M32 / M40 / M50 / M63.
KT grommet based split cable gland for routing pre-terminated cables at a 90° angle to the enclosure wall. Metric thread sizes M32 / M50.
KT grommet based split cable gland for tool-less snap-in mounting on metric cut-outs M32 / M40 / M63.
KT grommet based split cable gland for cables with large round connectors of up to 80 mm in diameter.
Suitable for cut-outs of heavy industrial connectors. Mounting via screws or expanding rivets.
Flexible pyramid shaped IP54 / UL Type 12 cable entry grommet for cable diameters 27-68 mm.
Strain relief and cable routing plates for snap-on assembly on TS35 rails and C section rails C30.
EMC cable clamp for mounting on C section rails C30.
EMC cable clamp assembly with shield clamps for EMI shielding of up to 12 lines.
90° angled bulkhead fitting for routing corrugated cable conduits via conduit connector (FWS-A) or direct pickup (FWS-B).