KT CR multi / special cable grommets

for the use in cleanrooms, 1 - 8 mm / IP54 / UL Type 12

Cable grommets KT CR small are used with the following cleanroom cable entry components:

KT CR multi-hole and special grommets enable a sealing of the cables with IP54 and UL Type 12.

When using double or quadruple grommets the cable density of cleanroom cable entry frames can be greatly increased. The multi-hole model range KT CR small is designed for cable diameters from 1 to 8 mm. ATG CR adapter grommets provide the possibility to hold a small KT CR grommet to reduce the clamping range down to 1 mm.

When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.

The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).

The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.

Specifications

IP rating (EN 60529) IP54
UL Type (UL 50E) UL Type 12
Material Elastomer
Flame class UL94-V0, self-extinguishing
Operating temperature -40 C° to 100 C°
Properties silicone free, halogen free

Advantages & benefits

  • Enable routing of pre-terminated cables through cable entry frames and split cable glands
  • Available for a large range of cable diameters
  • Greatly increased cable density when using double or quadruple grommets

Product types & sizes

You haven't found anything suitable yet?

Try the ProductFinder

Suitable for:

You might also be interested in the following products