|For max. no. of cables||4|
|Colour||grey (similar RAL 7035)|
|Mounting height||2 mm|
|For cable type||Round cable|
|Clamping range||4 x 1 - 6 mm|
The KT-DT cable grommets can be used anywhere where a large number of electrical, pneumatic or hydraulic lines must be routed and sealed with IP54. By using the KT-DT grommets, the cable density can be significantly increased.
KT-DT grommets are compatible with split icotek cable entry frames, such as KEL-U, KEL and KEL-FG. The routing of cables with and without preassembled connectors in one cable entry frame can thus be easily combined.
The KT-DT grommets are also perfectly suitable for the assembly of subsequently terminated cable harnesses.
|IP rating (EN 60529)||IP54|
|UL Type (UL 50E)||UL Type 12|
|Flame class||UL94-V0, self-extinguishing|
|Operating temperature||-40 C° to 100 C°|
|Properties||silicone free, halogen free|
Always find the right size and the right cable grommets for your cable entry!
Centrally split cable entry frame. Suitable for cut-outs of heavy multi-pin connectors.Available as single, double or multi-row versions.
Grommet based cable entry frames for supply cables with large diameters of up to 75 mm. Available as single or double row version.
Flange enclosure for routing preassembled cables in a 90° angle to the enclosure wall. Available as single or double row version.
Split cable entry frame for flat cables as well as prefabricated round cables.
Grommet based cable entry frames suitable for cut-outs of heavy industrial connectors. Available as single or double row version.
Split cable gland for preassembled cables with metric thread sizes M20 to M63.
Cable gland for cables with large round connectors of up to 80 mm in diameter.
Split cable gland for tool-free snap-in mounting on metric cut-outs.
Split cable gland for routing pre-terminated cables at a 90° angle to the enclosure wall.
Adapter grommet based on KT cable grommets for PushPull connection technology.
Tool-free snap-in mounting frames for KEL, KEL-U and KEL-QUICK.
Blank adapter grommet based on large QT grommets for custom interface solutions (e.g. screw mounted hybrid connectors).
EMC cable clamps for direct mounting via screws, e.g. on metal sheets.
EMC cable clamp assembly with shield clamps for EMI shielding of up to 12 lines.
Split cable conduit for routing of pre-terminated cables.