Products»Multi Cable Transit for Cables with Connectors

Split Multi Cable Transit for Cables with Connectors

Waterproof with up to IP66/UL Type 4X*

 
Split cable entry systems for cables with connectors - waterproof with up to IP66 seal

Using the patented grommet based icotek cable transit systems, a large number of pre-terminated cables (up to 65 mm in diameter) and cables without connectors (up to 75 mm in diameter) can be quickly routed into enclosures, control panels or machines and be sealed with up to IP66/UL type 4X* rated ingress protection (certified according to EN 60529/UL50-E). In addition, the cable transits serve as strain reliefs on the cable (acc. to EN 62444). The split multi cable transit system enables quick and easy assembly which is great for retrofits and maintenance. Find out more »

Request your free product sample

icotek Cable Transit Systems at a Glance


Filter products:

Grommet based cable entry for standard cut-outs of heavy industrial connectors. Available as single or double row version.

Split Cable Transit, UL Type 12/4X* / IP66

KT grommet based cable entry for standard cut-outs of heavy industrial connectors. Available as single or double row version.

» KEL-ER | KEL-ER-E
Grommet based cable entry frames suitable for cut-outs of heavy industrial connectors. Available as single or double row version.

Split Cable Transit, UL Type 12 / IP54

KT grommet based cable entry frames for standard cut-outs of heavy industrial connectors. Available as single or double row version.

» KEL-U | KEL-E

90° Cable entry adapter, up to IP66

KEA is a multifunctional adapter for various cable entry systems. The adapter allows cables to be routed at a 90° angle and sealed with up to IP66.

» KEA

Split Cable Transit for Tool-Less Assembly, UL Type 12 / IP54

KT grommet based cable entry frames for tool-less assembly. Suitable for standard cut-outs of heavy industrial connectors.

» KEL-FA
Classic centrally split cable entry frame. Suitable for cut-outs of heavy multi-pin connectors.Available as single, double or multi-row versions.

Centrally Split Cable Transit, UL Type 12 / IP54

Classic KT grommet based cable entry frames for standard cut-outs of heavy industrial connectors. Also available as multi-row versions.

» KEL

Split Bulkhead for 90° Cable Transit, IP65

KT grommet based bulkhead for 90° preassembled cable transit for cable diameters up to 35 mm and a large bending radius (r max. = 150 mm).

» KEL-FW

Split 360° Multi Cable Transit, M32-M75, IP54

With the distribution box, centrally routed cables (with and without connectors) can be distributed 360° in all desired directions.

» DB Distribution Box

Split 90° Split Flange Enclosure, IP65

KT grommet based flange enclosure for routing preassembled cables in a 90° angle to the enclosure wall. Available as single or double row version.

» KEL-FG-ER | KEL-FG-ER-E
Flange enclosure for routing preassembled cables in a 90° angle to the enclosure wall. Available as single or double row version.

Split 90° Cable Entry Enclosure, UL Type 12 / IP54

KT grommet based flange enclosure for routing preassembled cables in a 90° angle to the enclosure wall. Available as single or double row version.

» KEL-FG | KEL-FG-E
QT grommet based cable entry frames for tool-free assembly. Available as single or double row version.

Split Cable Transit for Tool-Less Assembly, IP54

QT grommet based cable entry frames for tool-free assembly. Suitable for standard cut-outs of heavy industrial connectors. Available as single or double row version.

» KEL-QUICK | KEL-QUICK-E

Split Cable Transit for Flat Cables, IP54

KT/FT grommet based split single-row cable entry frame for flat cables as well as prefabricated round cables.

» KEL-FL

Split Cable Transit for Large Diameters, UL Type 12 / IP54

KT grommet based cable entry frames for supply cables with large diameters of up to 75 mm. Available as single or double row version.

» KEL 183

Split Cable Transit for Supply Lines, UL Type 12 / IP54

Split cable entry frame for supply lines with diameters up to 65 mm.

» KEL-JUMBO

Cover Plugs

The openings at the fastening points of the cable entry plates & frames can be closed with the cover plugs.

» Cover Plugs

Flat Gaskets

A flat gasket is provided to ensure a clean seal between the cable transit frame and the enclosure / control panel wall.

» Flat Gaskets

Snap-In Frames for Cable Transits, UL type 12 / IP54

Toolless snap-in mounting frames for KEL, KEL-U and KEL-QUICK.

» KEL-SNAP
Split cable gland for preassembled cables with metric thread sizes M20 to M63.

Split Cable Glands, IP54 - IP68

Split cable glands for preterminated cables (for cut-outs M16 - M80).

Split Cable Entry Plate for Tool-Less Assembly, IP54

QT grommet based cable entry plate made of elastomer for cables with or without connectors. Snap-in mounting.

» KEL-QTA

Split U-Shaped Cable Grommet, up to IP54

Split U-shaped cable grommet for cables with and without connectors (with a diameter range of 4 - 11 mm). Tool-less assembly.

» UT

Split Cable Entry Plate for Tool-Less Assembly, IP54

Split M20 cable entry plate made of elastomer for cables with or without connectors. Tool-less mounting.

» KEL-QTE

Bulkhead Fitting for Cable Conduits

90° angled bulkhead fitting for routing corrugated cable conduits via conduit connector (FWS-A) or direct pickup (FWS-B).

» CONFiX™ FWS

Split Brush Plates for Cable Pass-Through

Suitable for cut-outs of heavy industrial connectors. Mounting via screws or expanding rivets.

» KEL-BES-S

Cable Grommets

Split cable grommets for prefabricated cables, multi-range grommets, special grommets for e.g. telephone cables, flat wires or supply lines.

Membrane Plugs for Cable Entry Plates & Cable Grommets

Plugs for sealing already pierced membranes of cable entry plates as well as for numerous cable grommets.

» ST-B

IMAS-CONNECT™ Adapter Grommets

Adapter grommets with inner threads and for mounting of Keystone and PushPull modules.

The Practical icotek Product Configurator

With the product configurator, you can now assemble your cable entry system with the required cable or adapter grommets.

Search and Filter Products with the icotek ProductFinder!

Find the perfect product for your application. Try it now!
 

 

Info Guide – Everything You Need to Know About Split Cable Transit Systems

The icotek split cable transit systems enable the transit of a large number of connectorised cables or complete cable harnesses in a small area. In contrast to conventional cable glands the connector doesn’t have to be cut off the cable in advance and be re-connected afterwards. Thus, the cable manufacturer's warranty remains and you save a lot of assembly time. But also electrical, pneumatic or hydraulic lines without connectors as well as corrugated conduits and hoses can be easily routed, sealed and strain relieved using split cable entry systems.

 

icotek Cable Transit Systems – Completely Splittable, High Cable Density

The icotek cable transit system is completely split. Thus, a quick and easy assembly is possible. The preterminated cable is placed into the » split grommet which is set into one of the cable transit frame’s compartments. The grommet is now securely fixed inside the frame and can’t fall out. Due to the fine gradation of the cable diameters, there is an excellent adaptation of the grommet to the inserted cable or hose. Once the lid is affixed to the base frame, it is compressed and tightly sealed. The high compression pressure ensures strain relief according to EN 62444 and certified sealing rates up to IP66 (acc. to EN 60529) and UL Type 4X* (acc. to UL 50E).

Another benefit is the high cable density of the cable transit systems that enable a space-saving assembly. For example, when using multiple grommets with some specific frame sizes, up to 120 lines can be routed in an area of 15 × 15 cm.

 

Easy Assembly of the Cable Transit Systems

The cable transit systems are either screw mounted or simply snapped into a pre-mounted snap frame. The cable transit systems are available in many different sizes which are mostly based on standard cut-outs of industrial multi-pin heavy duty connectors. Convince yourself of the easy and quick installation of the split cable transit systems with our assembly video.

 

Large Variety of Cable Transit Systems

The different model ranges of the icotek split cable transit systems offer various application possibilities:

  • For cable routing (up to 35 mm in diameter) in extreme areas the » cable transit system KEL-ER offers high protection ratings IP66/UL Type 4X*. Available in 8 different sizes.
  • Similarly, icotek offers the » cable transit system KEL-U in the same sizes, with protection rating IP54/UL type 12.
  • The centrally split » cable transit system KEL is an icotek classic (protection ratings IP54/UL type 12) which, due to its extensions, offers the highest cable density. Cables and hoses with diameters up to 35 mm can be routed.
  • The » cable transit systems KEL-FA, » KEL-QUICK and » KEL-QTA (protection rating IP54) impress with the possibility of quick and consistently tool-less installation. Available in many different sizes.

Well Tested & Certified

Approvals and standards such as flame class UL 94-V0, IP and UL rated ingress protection, UL recognized, DNV, RINA, EN 45545-2 and ECOLAB detergent resistance enable icotek cable transit systems to be real alternatives to conventional cable glands.