Split cable entry systems – waterproof with up to IP66 seal

for cables with connectors


Split cable entry system IP66 for cables with connectors

Using the patented grommet based icotek cable entry system, a large number of pre-terminated cables (up to 65 mm in diameter) and cables without connectors (up to 75 mm in diameter) can be quickly routed into enclosures, control panels or machines and be sealed with up to IP66 / UL type 4X rated ingress protection (certified according to EN 60529 / UL50-E). In addition, the cable entry frames serve as strain reliefs on the cable. The split cable entry system enables quick and easy assembly which is great for retrofits and maintenance. Find out more »
 

icotek cable entry systems at a glance:

Filter products:
Protection rating:
Strain relief EN 62444:
Split cable entry frame, IP66 / UL type 12/4X

Grommet based cable entry for standard cut-outs of heavy industrial connectors.

  • KEL-ER 24
  • KEL-ER 16
  • KEL-ER 10
  • KEL-ER-B
Split cable entry frame, single row, IP66 / UL type 12/4X

Compact grommet based cable entry frames. Single row design for applications with limited space.

  • KEL-ER-E5
  • KEL-ER-E4
  • KEL-ER-E3
  • KEL-ER-E2
Split cable entry frame, IP54 / UL type 12

Grommet based cable entry frames suitable for cut-outs of heavy industrial connectors.

  • KEL-U 24
  • KEL-U 16
  • KEL-U 10
  • KEL-U-B
Split cable entry frame, single row, IP54 / UL type 12

Compact grommet based cable entry frames. Single row design for applications with limited space.

  • KEL-E5
  • KEL-E4
  • KEL-E3
  • KEL-E2
Split cable entry frame for tool-free assembly, IP54

QT grommet based cable entry frames for tool-free assembly.

  • KEL-QUICK 24
  • KEL-QUICK 16
  • KEL-QUICK 10
  • KEL-QUICK-B
Split cable entry frame for tool-free assembly, single row, IP54

Compact QT grommet based cable entry frames. Ideal for applications with limited space.

  • KEL-QUICK-E5
  • KEL-QUICK-E4
  • KEL-QUICK-E3
  • KEL-QUICK-E2
Centrally split cable entry frame, IP54 / UL type 12

Classic centrally split cable entry frame. Suitable for cut-outs of heavy multi-pin connectors.

  • KEL 24
  • KEL 16
  • KEL 10
  • KEL-B
Extensions of KEL cable entry frames, IP54

Extensions of KEL frames for routing up to 120 preassembled cables.

  • KEL 16-E
  • KEL 24-E
  • KEL 16-MT
  • KEL 24-MT
  • KEL 16-2MT
  • KEL 24-2MT
Split 90° cable entry enclosure, IP54

Flange enclosure for routing preassembled cables in a 90° angle to the enclosure wall.

  • KEL-FG-A
  • KEL-FG-B
Split 90° cable entry enclosure, single row, IP54

Compact flange enclosure for routing preassembled cables in a 90° angle to the enclosure wall.

  • KEL-FG-E5
  • KEL-FG-E3
  • KEL-FG-E2
Snap-in frames for cable entries, IP54 / UL type 12

Tool-free snap-in mounting frames for KEL, KEL-U and KEL-QUICK.

  • KEL-SNAP 24-MT
  • KEL-SNAP 24-E
  • KEL-SNAP 24
  • KEL-SNAP 16
  • KEL-SNAP 10
  • KEL-SNAP-B
Split cable entry frame for large diameters, IP54 / UL type 12

Grommet based cable entry frames for supply cables with large diameters of up to 75 mm.

  • KEL 183
  • KEL 183-E
  • KTMB 183 grey
Split cable entry frame for supply lines, IP54 / UL type 12

Split cable entry frame for supply lines with diameters up to 65 mm.

  • KEL-JUMBO
  • KTF grey
Split cable entry frame for flat cables, IP54

Split cable entry frame for flat cables as well as prefabricated round cables.

  • KEL-FL
  • FT grey
Slit cable entry plate for tool-free assembly, IP54

Cable entry plate made of elastomer for cables with or without connectors. Snap-in mounting.

  • KEL-QTA 24
  • KEL-QTA 10
  • KEL-QTA-B
  • KEL-QTA round
Slit cable entry plate for tool-free assembly, IP54

Slit M20 cable entry plate made of elastomer for cables with or without connectors. Tool-free mounting.

  • KEL-QTE
Cable glands, IP54 - IP68

Split cable glands for preterminated cables (for cut-outs M16 - M80)

Cable grommets

Slit cable grommets for prefabricated cables, multi-range grommets, special grommets for e.g. telephone cables, flat wires or supply lines.

  • Cable grommets
IMAS-CONNECT™ Adapter grommets

Adapter grommets with inner threads and for snap-in mounting of Keystone modules.


[Translate to English:] Kabeleinführung für Leitungen mit Stecker

Info guide – everything you need to know about split cable entry systems!

The icotek split cable entry systems enable the transit of a large number of connectorised cables or complete cable harnesses in a small area. In contrast to conventional cable glands the connector doesn’t have to be cut off the cable in advance and be re-connected afterwards. Thus, the cable manufacturer's warranty remains and you save a lot of assembly time. But also electrical, pneumatic or hydraulic lines without connectors as well as corrugated conduits and hoses can be easily routed, sealed and strain relieved using split cable entry systems.
 

icotek cable entry systems - completely splittable, high cable density

The icotek cable entry system is completely split. Thus, a quick and easy assembly is possible. The preterminated cable is placed into the slit grommet which is set into one of the cable entry frame’s compartments. The grommet is now securely fixed inside the frame and can’t fall out. Due to the fine gradation of the cable diameters, there is an excellent adaptation of the grommet to the inserted cable or hose. Once the lid is affixed to the base frame, it is compressed and tightly sealed. The high compression pressure ensures strain relief according to EN 62444 and certified sealing rates up to IP66 (acc. to EN 60529) and UL type 4x (acc. to UL 50E).

Another benefit is the high cable density of the cable entry systems that enable a space-saving assembly. For example, when using multiple grommets with some specific frame sizes, up to 120 lines can be routed in an area of 15 × 15 cm.

With the new product configurator, you can now assemble your chosen cable entry system with the required cable or adapter grommets. A quote for the fully configured product can then be easily requested online. Check it out »

The cable entry systems are either screw mounted or simply snapped into a pre-mounted snap frame. The cable entry systems are available in many different sizes which are mostly based on standard cut-outs of industrial multi-pin heavy duty connectors. Convince yourself of the easy and quick installation of the split cable entry systems with our assembly videos:


Large variety of cable entry systems

The different model ranges of the icotek split cable entry systems offer various application possibilities:

  • For cable routing (up to 35 mm in diameter) in extreme areas the cable entry system KEL-ER offers high protection ratings IP66 / UL type 4X. Available in 8 different sizes.
     
  • Similarly, icotek offers the cable entry system KEL-U in the same sizes, with protection rating IP54 / UL type 12.
     
  • The centrally split cable entry system KEL is an icotek classic (protection ratings IP54 / UL type 12) which, due to its extensions, offers the highest cable density. Cables and hoses with diameters up to 35 mm can be routed.
     
  • The cable entry systems KEL-QUICK and KEL-QTA (protection rating IP54) impress with the possibility of quick and consistently tool-free installation. Available in many different sizes.
     
  • For routing cables in a 90° angle (protection rating IP54) icotek offers the cable entry system KEL-FG in 5 different sizes.
     
  • For routing flat cables (as well in combination with preterminated round cables) the cable entry system KEL-FL is the perfect choice.
     
  • For routing large diameter supply lines or hoses with up to 75 mm in diameter icotek offers the cable entry systems KEL-JUMBO and KEL 183.
     

Cable pass-through with brush seal

For applications with lower requirements on ingress protection icotek offers cable pass-through plates with brush seal, specifically designed to feed cables easily into server racks, control panels and through raised floors and walls.
 

Well tested & certified

Approvals and standards such as flame class UL 94-V0, IP and UL rated ingress protection, UL recognized, DNV-GL, EN 45545-2 and ECOLAB detergent resistance enable icotek cable entry systems to be real alternatives to conventional cable glands.

With our icotek ProductFinder you can easily find your perfect cable entry system with just a few clicks. In case that really none of our systems suits your application requirements we offer customised solutions on request. Please contact us.