Split cable glands – waterproof with up to IP66 / IP68 seal

for cables with connectors


By using split cable glands by icotek pre-terminated cables with diameters from 1 to 35 mm can be quickly routed into enclosures, control panels or machines and be sealed with up to IP66 / IP68 / UL type 12 rated ingress protection (certified according to EN 60529 / UL50-E). In addition, the cable glands serve as strain reliefs on the cable. The split cable glands enable quick and easy assembly which is great for retrofits and maintenance. Find out more »

 

icotek Split Cable Glands at a Glance:

Filter products:
Protection rating:
Strain relief:
Split cable gland, M25-M63, IP65-IP68

Split cable gland for preassembled cables with metric thread sizes M25 / M32 / M50 / M63. Certified IP65 / IP66 / IP67 / IP68 protection.

  • KVT-ER
Split cable gland, M20-M63, IP54 / UL type 12

Split cable gland for preassembled cables with metric thread sizes M20 to M63. Certified IP54 / UL type 12 protection.

  • KVT grey
  • KVT black
Split 90° cable gland, M32-M50, IP54

Split cable gland for routing pre-terminated cables at a 90° angle to the enclosure wall. Certified IP54 protection.

  • KVT-W90 grey
  • KVT-W90 black
Split snap-in cable gland, M32-M63, IP54

Split cable gland for tool-free snap-in mounting on metric cut-outs. Certified IP54 protection.

  • KVT-SNAP grey
Split cable gland, M80, IP54 / UL type 12

Cable gland for cables with large round connectors of up to 80 mm in diameter. Certified IP54 / UL type 12 protection.

  • KVT 80 grey
  • KVT 80 black
Compact split cable gland, M16-M50, IP54

Compact split cable glands with metric thread sizes M16 to M50. Certified IP54 protection.

  • QVT grey
Compact split snap-in cable gland, M25-M40, IP54

Compact split cable gland for tool-free snap-in mounting. Certified IP54 protection.

  • QVT-CLICK grey
Cable gland with brush seal, M32 / M50

Split cable gland with brush seal, for metric cut-outs M32/M50.

  • KEL-BES-S round
Cable grommets

Slit cable grommets for prefabricated cables, multi-range grommets for cables without connectors, special grommets for e.g. telephone cables, flat wires or supply lines.

  • Cable grommets
Locknuts, M16-M85

Hexagonal locknuts for cable glands, special locknuts with cut-outs for various connectors and split locknuts for corrugated conduits.

  • KGM grey
  • KGM black
  • GMT black

Cable glands for cables with connectors

Info guide – everything you need to know about split cable glands!

The icotek split cable glands enable the transit of connectorised cables or complete cable harnesses. In contrast to conventional cable glands the connector doesn’t have to be cut off the cable in advance and be re-connected afterwards. Thus, the cable manufacturer's warranty remains and you save a lot of assembly time. But also electrical, pneumatic or hydraulic lines without connectors as well as corrugated conduits and hoses can be easily routed, sealed and strain relieved using split cable glands.
 

icotek cable glands - completely splittable and user-friendly

A quick and easy assembly is possible due to the completely split system. The prefabricated cable is placed into the slit grommet which is set into one of the gland halves. Due to the fine gradation of the cable diameters, there is an excellent adaptation of the grommet to the inserted cable or hose. Depending on the size of the cable gland, one, two or four separate grommets can be installed. By using multi-hole grommets up to 16 lines can be routed with one cable gland. The two gland halves can be easily snapped together without the need of tools (screw assembly in case of the KVT-ER model). The assembled cables are securely sealed and held inside the cable gland grommets. To mount the cable glands either snap it into the wall or screw it with a hexagonal locknut. Convince yourself of the easy and quick installation of the split cable glands with our assembly video:


Large variety of cable glands

The different model ranges of the icotek split cable glands offer various application possibilities:

  • The new split cable gland KVT-ER provides high certified ingress protection ratings (IP65 / IP66 / IP67 / IP68 / UL type 12) due to an injected gasket and it provides strain relief acc. to EN 62444. The KVT-ER is available for metric cut-outs M25-M63.
     
  • The split IP54 cable gland KVT is an icotek classic. It can be tool-free assembled with KT grommets and be mounted on metric cut-outs M20-M63.
     
  • The angled split IP54 cable gland KVT-W90 enables prefabricated and standard cable transit at a 90° angle to the enclosure or machine wall. It is as well particularly suitable for the introduction of corrugated conduits. Available for M32 and M50 cut-outs.
     
  • The very compact split cable gland QVT (IP54) is tool-free assembled with QT grommets and can be mounted on metric cut-outs M16-M50. The QVT series is characterised by its low mounting height and its extremely small structure.
     
  • The split IP54 cable glands QVT-CLICK (M25, M32 and M40) and KVT-SNAP (M32, M40 and M63) are ideal for mounting without any tools by snapping them directly into the cut-out. Therefore, they are suited perfectly when maintenance and retrofitting. A fixation with a locknut is not necessary, but possible with the KVT-SNAP.

Depending on the model series, the split cable glands KVT and QVT are available in metric sizes from M16 to M63, thus matching metric standard cut-outs.

Optional accessories: For split cable glands icotek offers split locknuts as well as special locknuts which are suitable for routing D-Sub, DVI, Patch, USB, VGA or PROFIBUS connectors.
 

Cable gland with brush seal

For applications with lower requirements on ingress protection icotek offers a split cable gland with brush seal, specifically designed to feed cables easily into server racks, control panels and through raised floors and walls.
 

Well tested & certified

The split icotek cable glands comply with important standards like flame class UL94-V0, IP / UL rated ingress protection, UL recognized, DNV-GL, ECOLAB detergent resistance, UV resistance and the European railway standard EN 45545-2 for fire safety and are therefore suitable for many applications and industries. Certificates can be requested directly from us.

Please try our icotek ProductFinder which helps you to find a suitable cable gland for your application.



Subscribe to our free newsletter!

  • Be the first to learn about our latest product news
  • Our latest assembly videos show you how to use our products
  • You'll receive a maximum of 2 newsletters per month
  • The subscription can be canceled at any time
We will store your provided information. We will only use this information for processing your enquiry. We will not disclose your data to third parties. By ticking this box you agree to our terms and conditions.