KT CR | Doorvoertulen voor cleanrooms
voor kabeldiameters 1-35 mm / IP66 / IP68 / UL Type 12 / 4X*
Voor aanvragen uit België klik hier »
Cable grommets KT CR small are used with the following cleanroom cable entry components:
- KEL-ER CR cable entry frames
- KEL-U CR cable entry frames
In combination with KEL-ER CR cable entry frames the KT CR single-hole grommets enable a sealing of the cables with up to IP66 / IP68 and UL Type 4X*.
The model range KT CR small is designed for cable diameters from 1 to 17 mm. Cable grommets KT CR large accept a wide range of cable diameters from 16 to 35 mm.
When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.
*4X for indoor use only
Art.nr.
41232.601
Specificaties
IP-classificatie
IP64, IP66, IP68, IP67, IP55, IP54, IP65
UL Type (UL 50E)
UL Type 4X, UL Type 12
Vlam klasse
UL94-V0, zelfdovend
Materiaal
Elastomeer
Eigenschappen
halogeenvrij, zonder siliconen
Temperatuur
-40 C° tot 100 C°
Voordelen
Het doorvoeren van voorgeconfectioneerde kabels door kabel doorvoer frames en deelbare wartels
Beschikbaar voor een groot aantal kabeldiameters
Sterk verhoogde kabeldichtheid bij gebruik van dubbele of viervoudige doorvoertules
Voor aanvragen uit België klik hier »
Cable grommets KT CR small are used with the following cleanroom cable entry components:
- KEL-ER CR cable entry frames
- KEL-U CR cable entry frames
In combination with KEL-ER CR cable entry frames the KT CR single-hole grommets enable a sealing of the cables with up to IP66 / IP68 and UL Type 4X*.
The model range KT CR small is designed for cable diameters from 1 to 17 mm. Cable grommets KT CR large accept a wide range of cable diameters from 16 to 35 mm.
When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.
*4X for indoor use only
