Press room

 

You are a journalist looking for info on new icotek products or our company? Here you'll find current press releases for download, direct contact to our press department and the possibility to request high resolution product images.

Your contact person

Stephan Buchner
Press & Public Relations

Tel. +497175 923800
E-Mail » Press contact

 

New cable entry frames for the food sector

The cable management specialist icotek presents its new cable entry frames KEL-ER-BL. The KEL-ER-BL is a split cable entry frame for cables with and without plugs. Depending on the size, cables with a diameter of 1 to 35 mm are inserted, sealed with IP65 and, at the same, time strain-relieved in accordance with EN 62444.

Download press release | zip

icotek introduces new bulkhead

The bulkhead range from icotek is being expanded to include a new product variant in two versions. With the new bulkhead, cables can be routed at 90° over a very large bending radius. The new KEL-FW B is ideally suited for cables with plugs (max. ø 35 mm), rigid cables with larger diameters can also be easily inserted. 

Download press release | zip

icotek presents new ALLIOLiGHT system lights

The cable management specialist icotek integrated the company ALLIOLiGHT into the icotek group in spring 2022, thereby securing entry into the field of system lights. ALLIOLiGHT has been producing and selling switch cabinet lights for the industry and IT applications since 1990.

Download press release | zip

icotek presents first 360° Distribution Box 

The new icotek Distribution Box was presented for the first time at the sps 2022 in Nuremberg as a trade fair highlight. The DB Distribution Box is completely splittable and enables 360° cable entry and cable routing. 1 to 15 mm diameter cables with and without plugs are routed, sealed and, at the same time, relieved of strain in accordance with DIN EN 62444. Using multiple or single grommets (icotek KT-DT), up to a maximum of 48 cables can be routed, thus achieving a very high packing density. The cables can be distributed 360° from the central point in almost any desired direction.

Download press release | zip

Secured cable management made easy

The cable management specialist, icotek presents the new hook-and-loop tape fasteners, KBH-R and KBH-S. The new holders, in combination with the hook-and-loop tape cable tie, offer a versatile alternative to conventional cable ties. The KBH series is used for cable support and cable routing. The new hook-and-loop tape fasteners are now available for numerous mounting profiles. The KBH-R hook-and-loop fasteners are mounted with a simple/tool-free 90° twist lock. Whereas, the KBH-S hook and loop options are mounted with screws.

Download press release | zip

Routing cables at a 90° angle with IP65 

With the KEL-FG-ER, icotek's tried-and-tested KEL-FG product series now includes protection class IP65. The splittable flange enclosure enables routing cables at a 90° angle and is suitable for cables with and without connectors. Depending on the size, cables with a diameter of 1 to 35 mm (icotek single grommets KT 1 - 34) are routed, sealed with IP65 and, at the same time, strain relief in accordance with DIN EN 62444.

Download press release | zip

The new generation of tool-free cable entry

The next generation of split cable entry frames for the KT grommet system impresses with its tool-free assembly, high cable density and easy routing of pre-terminated cables. The new split KEL-FA cable entry system from icotek is a compact system for routing and sealing cables with and without connectors, as well as hydraulic and pneumatic hoses. The handling is very easy: After the frame has been assembled with KT type grommets and cables, the cover lid is put on and the two clamping levers are locked with the lower part by pressing them down.

Download press release | zip

New split multi-range grommets from icotek

With the KTMBS series, icotek presents their new splitted multi-range grommets for its cable entry frames and cable glands. Thanks to its split design, the new KTMBS series is used for the routing of pre-assembled and non-assembled cables. Twelve different grommet sizes are available. The entire grommet series covers a clamping range from 4 to 29 mm.

Download press release | zip

New cable entry plates from icotek

With the KEL-SCDP-TR, icotek is introducing new sizes and mounting options for the well-known icotek KEL-SCDP cable entry plates. With the metric KEL-SCDP-TR cable entry plate, individual cables without plugs can be routed and sealed up to a rating of IP65 and in accordance with DIN EN 60529. The newly developed variant KEL-SCDP-TR 63|5+1 also enables the routing of up to five cables. The unique advantage of the KEL-SCDP-TR series is the very large sealing range.

Download press release | zip

New components for icotek IMAS-CONNECT™ series

IMAS-CONNECT™ by icotek is a modular designed grommet system for mounting circular connectors, Keystone connectors, PushPull connectors, hose fittings, pressure compensation solutions and much more. By utilising the modular adapter system, the split icotek cable entry frame allows you to run cables (with or without connectors) and incorporate connectors in a single cut-out.

Download press release | zip

Cable entry systems for the use in cleanrooms

icotek now offers cable entry systems especially for use in cleanrooms. The tried and tested cable entry frames KEL-ER and KEL-U with their matching KT grommets, which are designed for cables with connectors, are already available. For cables without plugs, the KEL-DPZ cable entry plates are also available as a cleanroom version. All icotek cable entry systems for cleanrooms have been tested and certified by Fraunhofer IPA and are, therefore, suitable and certified for class 1 in accordance with ISO 14644-1: 2015. The highest demands are made in class 1. 

Download press release | zip

New cable entry plates KEL-DP 10

With the KEL-DP 10, icotek is expanding its range of tool-free mountable cable entry plates. The KEL-DP 10 complements the range of the already existing sizes KEL-DP 6, KEL-DP 16 and KEL-DP 24. For the routing of up to 50 standard cables, icotek offers a wide range of cable entry plates. Compared to cable glands, KEL-DPs are characterised above all by their high packing density and time-saving assembly and fitting. 

Download press release | zip

Two-part flange plates FP-AX-BES-U from icotek

icotek offers its newest flange plates FP-AX-BES-U. The two-part flange plates are designed for RITTAL enclosures type AX. The FP-AX-BES-U each have two brush strips which are arranged opposite each other and with different filling heights (1 x 35 mm and 1 x 50 mm). 

Download press release | zip

FDA-compliant cable entry plates KEL-DPU-HD from icotek

The new cable entry plates KEL-DPU-HD have been specially developed for the installation in food processing and packaging machines. During the development and in accordance with the Hygienic Design guidelines, care was taken to ensure that the visible side of the cable entry plate is free of dirt collecting recesses. KEL-DPU-HD entry plates are designed to route and seal cables without connectors (from 3.2 mm to 20.5 mm in diameter) in limited spaces with IP66/IP68.

Download press release | zip

New IMAS-CONNECT™ adapter grommets from icotek

For its modular designed adapter system IMAS-CONNECT™, icotek offers the new adapter grommets AT-FL and QT-AT-FL. The adapter grommets serve as an interface for M23 square flange connectors.

Download press release | zip

New cable entry plates KEL-DPZ 10

icotek is expanding its range of tool-free mountable cable entry plates with the compact KEL-DPZ 10. With the new size, up to 26 cables are inserted into a very small space and sealed twice in accordance with IP65 / IP66 / UL Type 12. At the same time, cables are strain-relieved. The diameter of the routed cables can vary from 3.2 to 12 mm. The KEL-DPZ product series are free of dirt-collecting recesses due to the hygienic design.

Download press release | zip

Splittable KEL-SNAP-S frame from icotek

icotek offers the tried and tested KEL-SNAP frame now as a new splittable version KEL-SNAP-S. The patented KEL-SNAP-S frames provide a quick and tool-free assembly for the KEL / KEL-U / KEL-QUICK / KEL-FG-A cable entry frames from icotek. 

Download press release | zip

KEL-DPZ-CLICK with double mounting option

With the new KEL-DPZ-CLICK up to 78 cables can be fed through just one cutout. The new cable entry plate has two different mounting options! The KEL-DPZ-CLICK is available for the standard metric cutouts M25, M32, M40, M50 and M63. 

Download press release | zip

icotek introduces new CCL cable clamps

The new CCL cable clamps are suitable for mounting on all common C-rails with an opening dimension of 16-17 mm. The vibration-proof clamps offer high, flexible clamping ranges from 6 mm to 50 mm. 

Download press release | zip

New adapter grommets for M23 square flanges 

For its modular designed adapter system IMAS-CONNECT™, icotek offers the new adapter grommets AT-FL and QT-AT-FL. The adapter grommets serve as an interface for M23 square flange connectors.

Download press release | zip

FDA-compliant cable entry plates from icotek

The KEL-DPZ-HD has been specially developed for the use in the food and pharmaceutical industries. Considering the Hygienic Design guidelines, icotek took great care to make the surface very smooth so that there are no dirt-collecting recesses on the visible side.

Download press release | zip

New split EMC cable entry from icotek

The new split EMC cable entry EMC-KEL-DS is based on the well-known KEL-U system from icotek. The EMC-KEL-DS guarantees EMC tightness and at the same time reliably diverts shield-related and field-related interference.

Download press release | zip

New IMAS-CONNECT™ adapter grommets

icotek is expanding its range of adapter grommets for its IMAS-CONNECT™ adapter system to include the AT-PP and the AT-K-M.

Download press release | zip

New EMC shield clamps for use on C-rails

The new EMC shield clamps LFC-MSKL and LFC-SKL are used for mounting with clamps on C-rails. The LFC contacts the cable shield directly on the C-rail. The existing cable clamp can still be used.

Download press release | zip

QTMB grommet: One size fits all!

icotek presents its first split multi-range grommets QTMB. At the same time, the company is also presenting new sizes for the screwless pre-assembled cable entry KEL-QUICK. The new QTMB grommet enables the entry of pre-terminated cables into the KEL-QUICK system from icotek.

Download press release | zip

icotek grommet with staged membrane rings

icotek presents its new cable grommet KT-SC with peelable membrane rings. The new cable grommet KT-SC has removable rings with graduated sealing areas. The new grommet KT-SC is based on the grommet size "KT large" from icotek. It enables the routing and sealing of cables and hoses with diameters from 5 to 28 mm.

Download press release | zip

icotek introduces modular adapter system IMAS-CONNECT™

The new IMAS-CONNECT ™ adapter system by icotek is a modular designed grommet system for mounting metric connectors, keystone couplers, hose fittings, pressure compensation elements and much more.

Download press release | zip

The product configurator for individual products

With the new online product configurator, customers and interested parties can now customise their split cable entry systems from icotek. You will be prompted to answer a few short questions in order to select the correct configuration for your needs.

Download press release | zip

Logo download

Download our logo in various file formats.

Download Logo | zip
 

More news & services