Automotive engineering

Cable management for construction machinery, agricultural equipment & commercial vehicles

Whether on-road or off-road - in automotive engineering, icotek cable entry products are used when cables have to be routed into the vehicle interior or have to be fed out of the vehicle body. icotek cable entry components are also used for (partially) integrated control and fuse boxes. Whether it is for construction machinery, agricultural machinery and equipment, fire trucks, special transport vehicles, snow groomers, buses and coaches, ... icotek offers highly efficient and economical solutions for every field of application in commercial vehicle construction.

cable routing road roller
KEL-ER-E2 cable entry frame IP65: Routing of a cable protection conduit from the control stick through the driver's cab into the engine compartment of a road roller.
Cable feedthrough vehicle mounted aerial platform
KEL 24 cable entry frame IP54: Routing of a cable protection conduit into the outdoor control panel of a vehicle mounted aerial platform.
cable routing mining dump truck
KEL-ER-B cable entry frame IP65: Routing of a corrugated conduit through the vehicle body of a mining dump truck
Cable entry fuse box
KEL 24-E cable entry frame IP54: Routing of several partly preassembled cables into the fuse box of a construction machine.

Split cable entry systems and cable glands by icotek enable a fast, safe and cost-effective way to feed cables with connectors (e.g. circular multi-pin connectors, signal connectors, sensor connectors...) or cable protection conduits through the vehicle floor, body or roof (e.g. for warning devices) without voiding the warranty of the cables. icotek split cable entry components also seal the entry points with up to IP65 / NEMA type 4X rated protection and provide strain relief according to EN 62444.

Cables without connectors as well as pneumatic and hydraulic hoses can be routed through membrane based multi-cable entry plates which provide up to IP67/IP68 and NEMA type 4X rated protection. For automotive applications with lower ingress protection requirements icotek offers brush plates and brush strips for round and rectangular cut-outs.

Fields of application for icotek cable feedthroughs in automotive engineering are e.g.

  • Central electrics
  • Fuse box
  • Switch box
  • Driver's cab (cable routing from engine compartment through vehicle body)
  • Various vehicle superstructures
  • Signal and warning devices

Our cable entry components fit on rectangular or round metric cut-outs from M16 to M85. For installation icotek offers suitable knockout tools and punches.

For a secure and structured cable management and strain relief of electrical lines icotek offers several strain relief plates for various mounting methods. For protected routing of cables at the exterior or the engine compartment icotek offers cable protection conduits in various sizes and materials.

In general, icotek products have a high quality and outstanding efficiency. All icotek products are quick and easy to install and to be assembled with cables, during the initial installation as well as in case of maintenance or retrofitting. Furthermore, icotek product materials are halogen and silicone free.

The icotek cable entry components comply with important approvals and standards like IP and NEMA rated protection, UL recognized, UV resistance or ATEX which makes icotek a strong and reliable partner for automotive engineers.

Do you have special requirements?

If our standard solutions do not fit your requirements, our engineers will develop individual concepts for you. Please feel free to contact us. We will submit an individual offer customised to your special requirements in automotive engineering.

Do not hesitate to contact us:

Tel.: +49 7175 923 800

E-Mail: pm@icotek.com


Cable management for automotive engieneering


Split cable entry frames for cables with connectors

Split cable entry frames with up to IP65 / NEMA type 4X rated protection and integrated strain relief acc. to EN 62444, for standard cut-outs of heavy industrial connectors.

Split cable glands for cables with connectors

Split cable glands with metric threads M16 - M63, with IP54 / NEMA type 12 rated protection.

Cable entry plates for cables without connectors

Membrane based cable entry plates with up to IP68 / NEMA type 4X rated protection. For round metric and standard cut-outs of heavy industrial connectors.

Cable protection conduits & conduit connectors

With conduit routing components cables can be easily routed inside parallel corrugated cable protection conduits into machines, control panels or switch cabinets.

Cable pass-through with brush seal

Cable pass-through with brush seal for metric round, individual and standard cut-outs of heavy industrial connectors.

Strain relief plates for cables and hoses

Cable collectors for a secured strain relief acc. to EN 62444 and for cable managament. For screw assembly or plugging on mounting rails.

Punch drivers & knockout punches

Hand hydraulic punch drivers and a large range of knockout punches for quick and easy punching of rectangular or round holes suitable for many icotek cable entry systems.

Subscribe to our free newsletter!

  • Be the first to learn about our latest product news
  • Our latest assembly videos show you how to use our products
  • You'll receive a maximum of 2 newsletters per month
  • The subscription can be canceled at any time