KT CR multi | KT CR special | Slitsade multi / specialinsatser
för renrum, IP54 / UL typ 12
Cable grommets KT CR multi are used with the following cleanroom cable entry components:
KT CR multi-hole and special grommets enable a sealing of the cables with IP54 and UL Type 12.
When using double or quadruple grommets the cable density of cleanroom cable entry frames can be greatly increased. The multi-hole model range KT CR small is designed for cable diameters from 1 to 8 mm. ATG CR adapter grommets provide the possibility to hold a small KT CR grommet to reduce the clamping range down to 1 mm.
When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.
ArtNr.
39939.601
Specifikationer
Brandklass
UL94-V0, självslocknande
Material
Elastomer
Egenskaper
halogenfri, silikonfri
IP-Klass
IP54
Temperatur
-40 C° till 100 C°
UL Type (UL 50E)
UL Type 12
Edut ja hyödyt
Gör genomföring av förkontakterade kablar via kabelgenomföring ramar och delade kabelgenomföringar
Finns för ett stort antal kabeldiametrar
Ökad packningstäthet vid användning av dubbla eller fyrdubbla genomföringar
Cable grommets KT CR multi are used with the following cleanroom cable entry components:
KT CR multi-hole and special grommets enable a sealing of the cables with IP54 and UL Type 12.
When using double or quadruple grommets the cable density of cleanroom cable entry frames can be greatly increased. The multi-hole model range KT CR small is designed for cable diameters from 1 to 8 mm. ATG CR adapter grommets provide the possibility to hold a small KT CR grommet to reduce the clamping range down to 1 mm.
When installing the small grommets in multiple rows, the flat sides should be facing each other. This allows the flat sides to match up and provide a secure seal.
The products with article ending .600 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1. The materials used for these products have been tested and certified for outgassing according to VOC/SVOC (ISO 14644-8; ISO 16000-6,-9,-11,-25, VDI 2083 sheet 17).
The products with the article ending .601 are tested and certified for particle emission for cleanroom class 1 according to ISO 14644-1.
