Multi Cable Transit for Cables with Connectors
Using the patented grommet based icotek KEL cable entry system, pre-terminated as well as standard cables without connectors can be routed into enclosures, control panels or machines. The cables are also sealed with up to IP66 / UL type 4X and strain relieved acc. to EN 62444.
Cable Glands / Cord Grips for Cables with Connectors
By using icotek split cord grips pre-terminated cables or complete cable harnesses with diameters from 1 to 35 mm can be quickly routed into enclosures, control panels or machines and be sealed with up to IP66/IP68 / UL type 12 rated ingress protection.
IMAS-CONNECT™ Adapter Grommets
IMAS-CONNECT™ is a consistently modular designed grommet system for mounting circular connectors, Keystone jacks, hose fittings, pressure compensation elements and much more into split cable entry frames and cable glands by icotek.
Cable Entry Plates for Cables without Connectors
With the membrane based cable entry plates, standard cables with diameters from 1.5 to 22 mm can be quickly routed into control panels, enclosures or machines and be sealed with certified protection up to IP68 / UL type 4X. In comparison to traditional solutions such as standard cable glands the cable density is greatly increased.
Brush Cable Pass-Through
icotek offers cable pass-through solutions with brush seal like brush plates and brush strips that are perfectly suitable for applications where no high sealing rate is required. The icotek brush seal solutions are meant for dust and dirt-proof cable pass-through of lines with or without preassembled connectors.
Strain Relief & Cable Management
By using universal icotek strain relief plates with cord grip function the user can quickly assemble, organize and strain relieve cables, wires, hoses or conduits according to EN 62444. With just one component you can route and strain relieve up to 12 of these lines, in static or dynamic applications.
EMC Cable Shield Clamps
For process measurement and control equipment an increasingly higher level of protection against failure is required. EMI shielding and grounding is very important. All icotek EMC cable clamps for grounding cable shield diameters from 1.5 to 48 mm have been tested utilizing various frequency ranges and in all tests there was minimal leakage resistance.
EMC Cable Entry Systems
In case of conducted as well as field bound EMI disturbances, our cable entry system EMC-KEL offers an effective way to divert and block those disturbances and provides an economic alternative to expensive EMC cable glands.
CONFiX Cable Conduit System
With CONFiX conduit routing components by icotek cables can be easily routed inside parallel corrugated cable conduits. They are perfect for machines, control panels or enclosures to ensure a maximum cable protection.
Control Panel & Enclosure Accessories
For easy assembly of icotek cable entry components and EMC cable shield grounding products as well as for your cable management needs icotek offers useful enclosure & control panel accessories.
icotek offers a small-sized hand hydraulic punch driver without hose which allows quick and easy punching of rectangular, square or round holes. Suitable round and rectangular punches fit exactly the cut-out dimensions of most icotek cable entry systems.
Cable Entry Systems for Railroad Technology
Based on the standards EN 45545-3 and EN 1363-1 icotek cable entry systems have been tested on "E" and "EI" using mounted IFPS fire penetration seals. All tested products have been successfully certified. icotek cable entry systems meet the classifications E45 and EI30!
Find the perfect icotek product for your application. Either use the search function or filter our products according to your requirements. Test it now!
With the new product configurator, you can now assemble your chosen cable entry frame or cable gland with the required cable or adapter grommets. A quote for the fully configured product can then be easily requested online.
Test our EMC configurator. EMC cable shield clamps as single, double or multi solution - individually configurable for your applications. Convince yourself!
Packaging Unit Configurator
In addition to the product-specific standard packaging units, individual packaging units of icotek products can now be requested online. Simply enter the article number of the product as well as your desired packaging unit and send your request!
In mechanical engineering and plant construction, customers demand the highest quality and service. At the same time, due to international competition, mechanical engineers are constantly striving to optimize costs and processes. icotek offers efficient and cost-effective solutions in the field of cable management.
Automation | Robotics
The automation of testing and production processes is progressing more and more. Robotic cells or lines, machines within a production line, automated material handling ... reliable and intelligent cable management is a major issue. icotek offers efficient and economical solutions.
Control Panel Construction
In control panel construction electrical engineers are confronted with deadlines and cost pressure. High demands are placed on individual control panel solutions, short production time and high quality at low costs. icotek offers highly efficient and cost-effective solutions in the fields of cable entry, cable management and EMC cable shielding.
Food Processing & Packaging
Manufacturers of food & beverage processing and packaging equipment are challenged to design more and more efficient, flexible and productive machinery. At the same time, due to international competition, engineers are constantly striving to optimize costs and processes. icotek offers efficient and cost-effective solutions in the field of cable management for food technology.
Solar Power | Photovoltaics
An important factor in the installation of large industrial photovoltaic systems (PV systems) is the secure and reliable wiring - indoors and outdoors. icotek offers highly efficient and cost-effective solutions for cable management and EMC technology.
Wind Turbines | Wind Energy
Today, wind turbine manufacturers are faced with the challenge of making the systems even bigger and more powerful while at the same time reducing production costs. In the areas of cable routing, cable management and EMC technology, icotek offers highly efficient and economical solutions – for onshore as well as for offshore wind farms.
In automotive engineering, icotek cable entry products are used when cables have to be routed into the vehicle interior or have to be fed out of the vehicle body. Whether it is for construction machinery, agricultural machinery and equipment, fire trucks, special transport vehicles, snow groomers, buses and coaches, ...
Due to the high fire class and temperature resistance of the icotek products as well as the certified ingress protection types, icotek cable entry components are very well suited to the needs of railroad technology. icotek products also meet the European fire safety standard for rail transport EN 45545-2 in Hazard Level HL3. Cable entry systems with fire penetration seals even meet EN 45545-3.
IMAS-CONNECT™ by icotek is a consistently modular designed grommet system for mounting circular connectors, Keystone couplers, hose fittings, pressure compensation elements and much more. By utilising the modular adapter system, the split icotek cable entry frame becomes a hybrid system.
North American Trade Shows
DEX Expo | 04/02 | Abbotsford, BC, CA MMTS | 05/11-13 | Montreal, QC, CA DEX Expo | 05/27 | Winnipeg, MB, CA DEX Expo | 06/11 | Innisfil, ON, CA Rockwell Automation | 06/24-25| Grand Rapids, MI, USA Rockwell Automation | 07/15-16 | Worcester, MA, USA Rockwell Automation | 08/05-06 | Nashville, TN, USA DEX Expo | 09/23 | Mount Hope, ON, CA The Assembly Show | 10/27-29 | Rosemont, IL, USA DEX Expo | 10/29 | Gloucester, ON, CA Rockwell Automation Fair | 11/18-19 | Anaheim, CA, USA
International Trade Shows
Experience icotek products live at numerous international trade shows all around the world. Here you will find all the information.
You are a journalist looking for info on new icotek products or our company? Here you'll find current press releases for download, direct contact to our press department and the possibility to request high resolution product images.
Here you will find interesting downloads, e.g. our latest product catalog as PDF, user manuals, various certificates and much more.
CAD Data Request
For your planning: request CAD data (STEP, IGS) of our products.
Request free samples of your preferred icotek product. Convince yourself of the quality of our products.
At our North American headquarters in Chicago we're continuously looking for great people to join our team! We offer an individually tailored induction program for challenging and varied tasks in a future-oriented and innovative industry.
icotek North America is a privately held company within the icotek group. icotek has been present in the US and Canadian markets for over 10 years. icotek North America, based in Chicago, Illinois provides full customer and product support to the US and Canada. At our headquarters in Germany we develop our products and distribute them worldwide.
Become Sales Partner
How to find us
10 x 3 mm (0,394 x 0,118") bus bar made of copper for collecting of cables and wires and grounding electromagnetic interferences. Suitable for several EMC cable shield clamps.