
Thread Extension for Cable Glands and Cable Entry Plates, M32 / M50
Custom made thread extension for cable glands and cable entry plates with metric threads M32 / M50.
» TE Thread ExtensionBy using split cable glands by icotek pre-terminated cables with diameters from 1 to 35 mm can be quickly routed into enclosures, control panels or machines and be sealed with up to UL type 4X*/IP66/IP68 rated ingress protection (certified according to EN 60529/UL50-E). In addition, the cable glands serve as strain reliefs due to the integrated cord grip function. The split cable glands enable quick and easy assembly which is great for retrofits and maintenance. Find out more »
Request your free product sampleCustom made thread extension for cable glands and cable entry plates with metric threads M32 / M50.
» TE Thread ExtensionKT grommet based split cable gland for preassembled cables with metric thread sizes M25 / M32 / M50 / M63.
» KVT-ERKT grommet based split cable gland for preassembled cables with metric thread sizes M20 / M25 / M32 / M40 / M50 / M63.
» KVTKT grommet based split cable gland for routing pre-terminated cables at a 90° angle to the enclosure wall. Metric thread sizes M32 / M50.
» KVT-W90KT grommet based split cable gland for tool-less snap-in mounting on metric cut-outs M32 / M40 / M63.
» KVT-SNAPKT grommet based split cable gland for cables with large round connectors of up to 80 mm in diameter.
» KVT 80With the new distribution box, centrally routed cables (with and without connectors) can be distributed 360° in all desired directions.
» DB Distribution BoxQT grommet based compact split cable glands with metric thread sizes M16 to M50.
» QVTQT grommet based compact split cable gland for tool-less snap-in mounting.
» QVT-CLICKSplit cable entry systems for preterminated cables (based on standard cut-outs of industrial multi-pin heavy duty connectors).
Multi cable transit systemsSplit cable gland with brush seal, for metric cut-outs M32/M50. Mounting via locknut or snap-in.
» KEL-BES-S roundHexagonal locknuts for cable glands, special locknuts with cut-outs for various connectors and split locknuts for corrugated conduits.
» KGM | GMTEMC bracket for metric gable glands. The economic alternative to classic EMC glands.
» EMC cable bracket for cable glandsSplit cable grommets for prefabricated cables, multi-range grommets, special grommets for e.g. telephone cables, flat wires or supply lines.
Cable grommetsPlugs for sealing already pierced membranes of cable entry plates as well as for numerous cable grommets.
» ST-BAdapter grommets with inner threads and for mounting of Keystone and PushPull modules.
» IMAS-CONNECT™With the product configurator, you can now assemble your cable entry system with the required cable or adapter grommets.
Check it out!The icotek split cable glands enable the transit of connectorised cables or complete cable harnesses. In contrast to conventional cable glands the connector doesn’t have to be cut off the cable in advance and be re-connected afterwards. Thus, the cable manufacturer's warranty remains and you save a lot of assembly time.
But also electrical, pneumatic or hydraulic lines without connectors as well as corrugated conduits and hoses can be easily routed, sealed and strain relieved using split cable glands.
A quick and easy assembly is possible due to the completely split system. The prefabricated cable is placed into the split grommet which is set into one of the gland halves. Due to the fine gradation of the cable diameters, there is an excellent adaptation of the grommet to the inserted cable or hose. Depending on the size of the cable gland, one, two or four separate grommets can be installed. By using multi-hole grommets up to 16 lines can be routed with one cable gland.
The two gland halves can be easily snapped together without the need of tools (screw assembly in case of the KVT-ER model). The assembled cables are securely sealed and held inside the cable gland grommets. To mount the cable glands either snap it into the wall or screw it with a hexagonal locknut. Convince yourself of the easy and quick installation of the split cable glands with our assembly video.
The different model ranges of the icotek split cable glands offer various application possibilities:
Depending on the model series, the split cable glands KVT and QVT are available in metric sizes from M16 to M63, thus matching metric standard cut-outs.
The split icotek cable glands comply with important standards like flame class UL94-V0, IP / UL rated ingress protection, UL recognized, DNV, RINA, ECOLAB detergent resistance, UV resistance and the European railroad standard EN 45545-2 for fire safety and are therefore suitable for many applications and industries. Certificates can be requested directly from us.