Product News


Our latest products and product range extensions.

DB Distribution Box - The 360° Cable Transit


With the new distribution box, centrally routed cables can be distributed 360° in all desired directions. Cables with and without connectors can be routed, sealed with IP54 and strain relieved in accordance with EN 62444.

More information

Hook-and-Loop Tape Holders for Secure Cable Routing


Universal screw mounting or versatile 90° twist lock mounting on Rittal VX25 / AX punched sections, 23 x 23 mm mounting rails or strut profiles from Bosch Rexroth, MiniTec and item.

More information

Flexible Cable Entry Grommets for Cable Diameters up to 52 mm


With the KEL-SCDP-TR cable entry grommet, single cables, hoses, and conduits can be routed and sealed at a rating of IP65. Its unique advantage is the large sealing range. The KEL-SCDP-TR grommets have a thread to fit in metric cut-outs from M25 to M63. Thus cut-outs for metric cable glands can be used. 

More information

Discover the New Configurations of the Round Cable Entry Plate KEL-DP


The KEL-DP success story continues! Due to recurring inquiries, we have decided to implement the KEL-DP 16 round as a new size in 3 different configurations and to add a new configuration to the KEL-DP 20 round. With the KEL-DP 16|1 and the KEL-DP 20|1, individual cables with diameters of up to 8 mm / 14 mm can now be routed and sealed with IP65.

More information

Cable Grommets with Peelable Membrane Rings Now Available in Small


The KT-SC small cable grommet is based on the small KT grommet and enables flexible routing and sealing (IP54) of electrical cables and pneumatic hoses with diameters from 4 - 12 mm.

More information

Split 90° Cable Transit Frame with IP65 Rated Protection


The new cable transit frame KEL-FG-ER with a split flange enclosure is the perfect solution for a 90° feed-in of cables with and without connectors. Due to the integrated seal, a protection class of up to IP65 is provided. 

More information

The New Multi-Range Cable Grommet KTMBS with a Variable Clamping Range


The new KTMBS cable grommets allow an even easier and much more flexible cable entry. Since one grommet size covers several clamping areas, cables of different diameters can be routed and sealed by using one grommet.

More information

The New Tool-Less Cable Transit KEL-FA


The KEL-FA series is a compact system for routing and sealing cables with and without connectors, as well as hoses and pneumatic cables. After the frame has been equipped with the KT grommet system, the cover is put on and the two clamping levers are locked with the lower part by pressing them down. The twist-proof construction of the KEL-FA enables intuitive assembly.

More information

Hygienic Cable Entry Plates - Now Available in Rectangular Size


The hygienic cable entry plates KEL-DPU-HD have been developed for installation in food processing and packaging machinery. The KEL-DPU-HD is particularly characterized by its solid robust frame and the increased strain relief of the routed cables. The KEL-DPU-HD 24 matches exactly the cut-out dimensions of 24-pin standard industrial connectors.

More information

Rail Cutter for DIN TS35 Rails & Bus Bars


The DIN-RC cutter cuts various DIN TS35 rails & bus bars with little effort and accurately. The cut is clean and free of burrs; there is no waste.

More information

Cable Entry Systems for the Use in Cleanrooms


A cleanroom is a room that has an extremely low concentration of airborne particles. Airborne particles are all particles and substances that are suspended in the air and for the most part cannot be seen with the naked eye. All icotek cable entry systems for the cleanroom tested and certified by the Fraunhofer IPA are suitable and certified for class 1 in accordance with ISO 14644-1!

More information

Split Flange Plates with Brush Strips


Two-part flange plates, each with two brush strips arranged in opposite directions, enable the routing of cables already pre-assembled with connectors and prevent dirt from entering the enclosure. The flange plates are designed for Rittal enclosures of type AX.

More information

Brush Strip with Clamping Profile for Numerous Enclosure Manufacturers


The brush strips with clamping profile are available in individual lengths as well as suitable for control panels from Rittal, nVent Hoffman (incl. ELDON), Häwa, Schneider Electric and ETA.

More information

Snap-On Mounting Frame Now Even More Versatile! 


The mounting frames KEL-SNAP enable a quick and tool-less assembly of cable entry frames. Due to its divisibility, the new mounting frame KEL-SNAP-S can also be installed subsequently. In addition, there is no need to thread the cables through the frame.

More information

EMC Shield Clamps on Ground Straps with or without Integrated Cable Fixing Function


The ground straps are fitted with a shield clamp at one end. This solution is used where space is limited.

More information

Just One Click Away:  The New Snap-In Cable Entry Plates


Now the assembly is even easier: the new variant of the proven cable entry plate KEL-DPZ is snapped into the cut-out directly from the front. This significantly reduces the assembly time. Alternatively, the new variant can be fastened with a locknut.

More information

Smart Strain Relief and EMC Shielding on the C-Rail


The cable clamps are characterized by a large variety of clamping areas from 6 to 50 mm. The suitable EMC shield clamp LFC contacts the cable shield directly on the C-rail.

Shipbuilding: icotek Products Now Have RINA Approval


Numerous icotek products such as cable entry systems and EMC solutions have now received RINA approval. This approval is a prerequisite for installation on ships classified by RINA. The RINA test criteria are almost identical to those of DNV (formerly Germanischer Lloyd), whose approval also holds a large number of our products. Many shipyards accept both DNV and RINA equally.

Adapter Grommets for Square Flanges


With the new IMAS-CONNECT™ adapter grommet AT-FL or QT-AT-FL, all modules of a square flange with the dimensions 19.8 x 19.8 mm (M23) can be integrated directly into the cable entry.

More information

Do you have any further questions?
Please contact us!

to the contact form

Subscribe to the icotek newsletter and always stay informed.

get the newsletter

More News & Services