Product News

Our Latest Products & Product Extensions


Single Cable Entry Plates with Peelable Membrane Rings for Cable Diameters from 5 to 36 mm

10/22/2019 | With the KEL-SCDP cable entry grommet, single cables, hoses, and conduits can be routed and sealed at a rating of IP65. Its unique advantage is the large sealing range. The single circular membrane can be peeled away to accommodate the specific diameter of the cable or hose...

More information


Flexible Cable Grommets KT-SC for Cable Diameters 5 - 28 mm

10/22/2019 | The KT-SC cable grommet is based on the large KT grommet and enables flexible routing and sealing of electrical cables and pneumatic hoses with diameters from 5 – 28 mm...

More information


IMAS-CONNECT™ adapter grommets for Keystone couplers & circular connector

09/17/2019 | MAS-CONNECT™ by icotek is a consistently modular designed grommet system for mounting circular connectors, Keystone couplers, hose fittings, pressure compensation elements and much more...

More information


Compact Cable Entry Plate KEL-DPZ Available in New Size 6

09/09/2019 | The new cable entry plate KEL-DPZ 6 is suitable for cut-outs, which are standardised for 6-pin heavy-duty connectors. With the KEL-DPZ 6 up to 27 cables, with diameters of 2.5 - 8 mm, can be routed and double-sealed in a limited space...

More information


Pressure Compensation Element PCE with Metric Thread M12 x 1,5

09/09/2019 | The new pressure compensation element M12x1,5 is used to avoid variations in pressure caused by differences in temperature and thus, to prevent damage caused by condensation...

More information


EMC Shield Clamps LFZ-M|MSKL: New Types – New Assembly Possibilities

07/30/2019 | The EMC shield clamp LFZ-M|MSKL is now available as 45° and 90° angled version. The 45° angled type is suitable for the use in frequency converters from various manufacturers. Thus, the cable can be inserted in a 45° angle into the wiring duct. For the cable routing and strain relieving on edges the 90° angled type can be used...

More information


EMC Shield Clamps with Double Strain Relief - Compliant with the PROFINET Installation Guidelines

07/17/2019 | The new EMC cable clamps are an ideal solution for the reliable grounding of cable shields including a double strain relief. The cables are strain relieved above and below the shield connection. Thus, the cable shield is not used for strain relief and therefore not damaged – as recommended by the PROFINET installation guidelines...

More information


Cable Entry Plates KEL-DP Available in New Sizes

06/18/2019 | Easy and tool-free assembly – our product portfolio of KEL-DP cable entry plates has now been extended with the sizes KEL-DP 6 (for cut-outs suitable for 6-pin heavy duty connectors), KEL-DP 16 (for cut-outs suitable for 16-pin heavy duty connectors) and KEL-DP 20 (for round metric cut-outs M20)!...

More information


icotek Ground Straps Now UL Listed

05/15/2019 | All icotek ground straps are now UL listed. We offer a large variety of lengths and cross sections, manufactured with highly flexible E-Cu stranded wires with connecting end pads made of tinned copper strips....

More information


Cable Gland with Screw and Snap-in Function QVT-CLICK Available in New Sizes

05/07/2019 | The QVT-CLICK cable gland series has been expanded with the new sizes M16 and M20! Besides the assembly from the front and protection class IP54 the new sizes enable screw and snap-in mounting. The QVT-CLICK series is now available in the sizes M16 - M40...

More information


Extremely Narrow Gland Plates for Rittal VX25 Enclosures

05/07/2019 | The new and extremely narrow gland plate KDRS-ESR is assembled on enclosure base plates. Slide frames for the KEL cable entry frames are already pre-assembled and mounted close to the enclosure mounting plate. This enables straight cable routing into the cable duct, without bending the cables. Thus, the cable duct can be set lower allowing more space for other components in the cabinet...

More information


New Multi-Membrane Cable Grommets QT-DT

05/07/2019 | The QT-DT cable grommets can be used anywhere where a large number of electrical, pneumatic or hydraulic lines must be routed and sealed with IP54...

More information


Compact Cable Entry Plate KEL-DPZ Available in New Size 16

04/09/2019 | The new cable entry plate KEL-DPZ 16 is suitable for cut-outs, which are standardized for 16-pin heavy-duty connectors. With the KEL-DPZ 16 up to 34 cables, with diameters of 1.5 - 16.2 mm, can be routed and double-sealed in a limited space...

More information


New Clamping Range & Additional Brush Height for Brush Strips with Clamp Profile

03/12/2019 | The KDR-BES-U system has been expanded with the new clamping range 2.5 - 3.0 mm. The new brush strips are also suitable for the new RITTAL VX25 enclosure generation. Furthermore, the KDR-BES-U is now also available with a brush height of 50 mm...

More information


Space-Saving EMC Shield Clamps with Large Clamping Range for 35 mm DIN Rail Shape H

03/12/2019 | The new, space-saving design of the SFZ-M|MSKL for 3-12 mm, for an effective gtrounding of single cable shields, enables even more advantages and benefits, e.g. a higher cable density by reverse arrangement (180° shifted) ...

More information