Product news

Our latest products & product extensions


New size KEL-DPZ 25

23.10.2018 | The new M25 sizes enable an easy cable entry of 4 x Ø 3,2 - 5,2 mm or 1 x Ø 3,2 - 6,5 mm and 2 x Ø 3,2 - 5,2 mm. Therefore cables without connectors or fibre optics can be routed into switch cabinets, control panels or machines with protection classes up to IP68 (certified acc. EN 60529) and UL Type 4X...

More information


EMC shield clamps mounted on ring cable lugs RCL|SKL

23.10.2018 | icotek shield clamps combined with ring cable lugs are now available in three different sizes. EMC shield clamps mounted on ring cable lugs are used in hard-to-reach areas to earth single cable shields. For assembly, the protective conductor is crimped with the ring cable lug…

More information


EMC shield clamps for printed circuit boards PCB|SKL 

23.10.2018 | PCB|SKL shield clamps provide an easy and safe way for the effective earthing of single cable shields. The new PCB|SKL type has a clamping range of 3 - 6 mm. The shield clamps and soldering foot of the new type are of a piece and allow the assembly on printed circuit boards...

More information


Pressure compensation element PCE 12 for cable grommets

17.09.2018 | icotek now offers pressure compensation element PCE to avoid water condensation in highly sealed enclosures. For use in cable grommets KT 12 in combination with cable entry frames KEL-ER or cable glands KVT-ER....

More information


New multi-membrane cable grommets DT 7 & DT 8

17.09.2018 | The DT cable grommets can be used anywhere where a large number of electrical, pneumatic or hydraulic lines must be routed and sealed with IP54. icotek now offers 2 small size grommtes with multiple membranes...

More information


The alternative to conventional EMC cable glands

01.07.2018 | Based on its cable entry frames, icotek now offers frames with EMC shielding. The frames for cable entry are highly conductive and metallized. Based on its cable entry frames, icotek now offers frames with EMC shielding. The frames for cable entry are highly conductive and metallised...

More information


Split brush plate for cable pass-through

14.06.2018 | With the KEL-BES-S 32 icotek offers an additional new size of its split brush plates for routing cables. The KEL-BES-S 32 is suitable for round holes with a diameter of 32 mm...

More information


icotek introduces new QT ServiceBox - always the right grommet at hand!

25.05.2018 | For the cable entry frames KEL-QUICK, the cable glands QVT, QVT-Click and the cable entry plates KEL-QTA, icotek now offers a selection with the most frequently used grommets. The grommets are used to equip the cable glands and provide a high ingress protection and strain relief...

More information


KVT-ER split cable gland with IP65 - IP68 certification

10.04.2018 | The KVT-ER is the newest addition to the existing range of split icotek cable glands. The extremely robust KVT-ER is used for routing and sealing of cables with and without connectors. The cable gland fits on cut-outs in standard metric sizes M32, M50 and M63. The KVT-ER fulfills the IP protection ratings IP65, IP66, IP67 and IP68 - certified according to EN 60529 ...

More information


Cable entry plates KEL-DPU now IP68 certified!

20.03.2018 | KEL-DPU entry plates are designed to route and seal cables without connectors (from 3.2 mm to 20.5 mm in diameter) in limited space – now with IP67 / IP68 certified...

More information


Cable grommet DT 5

19.03.2018 | icotek is expanding its range of DT cable grommets with the DT5. The DT cable grommets can be used anywhere where a large number of electrical, pneumatic or hydraulic lines must be routed and sealed with IP54...

More information